Any catalyst should be efficient and stable to be implemented in practice. This requirement is particularly valid for manganese hydrogenation catalysts. While representing a more sustainable alternative to conventional noble metal-based systems, manganese hydrogenation catalysts are prone to degrade under catalytic conditions once operation temperatures are high. Herein, we report a highly efficient Mn(I)-CNP pre-catalyst which gives rise to the excellent productivity (TOF° up to 41 000 h⁻¹) and stability (TON up to 200 000) in hydrogenation catalysis. This system enables near-quantitative hydrogenation of ketones, imines, aldehydes and formate esters at the catalyst loadings as low as 5–200 p.p.m. Our analysis points to the crucial role of the catalyst activation step for the catalytic performance and stability of the system. While conventional activation employing alkoxide bases can ultimately provide catalytically competent species under hydrogen atmosphere, activation of Mn(I) pre-catalyst with hydride donor promoters, e.g. KHBEt₃, dramatically improves catalytic performance of the system and eliminates induction times associated with slow catalyst activation.

Photoluminescent compounds can undergo various structural changes upon interaction with light. When these changes manifest themselves in the excited state, the resulting emitters can obtain a sensory function. In this work, we designed coordination compounds that can vary their emission color in response to thermal and mechanical stimuli. When embedded in a polymer matrix, Cu-NHC sensors act as mechanophores, and their color-based response can readily describe mechanical stress and phase transition phenomena. A strong practical advantage of new mechanophores over previous generations of organometallic stress sensors stems from their reliance on emission color variations that are easy to detect. In a broad context, our work implies that emission color variations that we often view as thermally governed can also be triggered mechanically and used to generate sensory information.

The catalytic asymmetric transfer hydrogenation (ATH) of ketones is a powerful methodology for the practical and efficient installation of chiral centers. Herein, we describe the synthesis, characterization, and catalytic application of a series of manganese complexes bearing simple chiral diamine ligands. We performed an extensive experimental and computational mechanistic study and present the first detailed experimental kinetic study of Mn-catalyzed ATH. We demonstrate that conventional mechanistic approaches toward catalyst optimization fail and how apparently different precatalysts lead to identical intermediates and thus catalytic performance. Ultimately, the Mn-N,N complexes under study enable quantitative ATH of acetophenones to the corresponding chiral alcohols with 75-87% ee.

Catalytic reductions of carbonyl-containing compounds are highly important for the safe, sustainable, and economical production of alcohols. Herein, we report on the efficient transfer hydrogenation of ketones catalyzed by a highly potent Mn(I)−NHC complex. Mn−NHC 1 is practical at metal concentrations as low as 75 ppm, thus approaching loadings more conventionally reserved for noble metal based systems. With these low Mn concentrations, catalyst deactivation is found to be highly temperature dependent and becomes especially prominent at increased reaction temperature. Ultimately, understanding of deactivation pathways could help close the activity/stability-gap with Ru and Ir catalysts towards the practical implementation of sustainable earth-abundant Mn-complexes.

The [4+2] cycloaddition reaction between 2-pyrone and Me₃Si−C≡P gives the corresponding 2-(trimethylsilyl)-λ³-phosphinine in good yields as a rather air and moisture stable, colorless oil. Insight into the regioselectivity of the pericyclic reaction was obtained with the help of deuterium-labeling experiments. The silyl-phosphinine acts as a ligand for the preparation of a Cu(I) and the first crystallographically characterized phosphinine-Ag(I) complex. The title compound was further used as a starting material for an alternative preparation of the parent phosphinine C₅H₅P by means of protodesilylation with HCl. C₅H₅P reacts with CuBr⋅S(CH₃)₂ to give an infinite Cu(I)Br coordination polymer. DFT calculations shed light on the influence of the -Si(CH₃)₃ group on the electronic properties of the aromatic phosphorus heterocycle.

A series of substituted, pyridyl-functionalized 2,4,6-triarylpyrylium salts were prepared and investigated for their light absorption and emission properties. After reaction with P(SiMe₃)₃, the corresponding λ³-phosphinines were obtained, which carry on the 4- or 6-aryl ring ±I and ±M substituents. Supported by DFT calculations, a systematic evaluation of the σ-donor and π-donor as well as π-acceptor properties of these low-coordinate P,N-hybrid ligands was performed. The modular synthetic approach allowed us at the same time to synthesize the structurally related bipyridine derivatives for comparison reasons. Reaction of the chelating ligands with [W(CO)₆] in THF afforded the corresponding [(P^N)W(CO)₄] and [(N^N)W(CO)₄] complexes. A crystallographic characterization of selected coordination compounds revealed significant structural differences between the pyridyl-phosphinine- and the bipyridine-based compounds. Their characterization by means of IR-spectroscopy gave experimental insight into the electronic properties of the respective ligands.

Conducting fibres and yarns promise to become an essential part of the next generation of wearable electronics that seamlessly integrate electronic function into one of the most versatile and most widely used form of materials: textiles. This review explores the many types of conducting fibres and yarns that can be realised with conjugated polymers and carbon materials, including carbon black, carbon nanotubes and graphene. We discuss how the interplay of materials properties and the chosen processing technique lead to fibres with a wide range of electrical and mechanical properties. Depending on the choice of conjugated polymer, carbon nanotube, graphene, polymer blend, or nanocomposite the electrical conductivity can vary from less than 10⁻³ to more than 10³ S cm⁻¹, accompanied by an increase in Young's modulus from 10 s of MPa to 100 s of GPa. Further, we discuss how conducting fibres can be integrated into electronic textiles (e-textiles) through e.g. weaving and knitting. Then, we provide an overview of some of the envisaged functionalities, such as sensing, data processing and storage, as well as energy harvesting e.g. by using the piezoelectric, thermoelectric, triboelectric or photovoltaic effect. Finally, we critically discuss sustainability aspects such as the supply of materials, their toxicity, the embodied energy of fibre and textile production and recyclability, which currently are not adequately considered but must be taken into account to ready carbon based conducting fibres for truly practical e-textile applications.

Structural heterogeneity defines the properties of many functional polymers and it is often crucial for their performance and ability to withstand mechanical impact. Such heterogeneity, however, poses a tremendous challenge for characterization of these materials and limits our ability to design them rationally. Herein we present a practical methodology capable of resolving the complex mechanical behavior and tracking mechanical impact in discrete phases of segmented polyurethane—a typical example of a structurally complex polymer. Using direct optical imaging of photoluminescence produced by a small-molecule organometallic mechano-responsive sensor we observe in real time how polymer phases dissipate energy, restructure, and breakdown upon mechanical impact. Owing to its simplicity and robustness, this method has potential in describing the evolution of complex soft-matter systems for which global characterization techniques fall short of providing molecular-level insight.