We present Stork - an extension of the EPC C1G2 protocol allowing streaming of data to multiple Computational Radio Frequency IDentification tags (CRFIDs) simultaneously at up to 20 times faster than the prior state of the art. Stork introduces downstream attributes never before seen in (C)RFIDs: (i) fast feedback for CRFID downstream verification based on the internal EPC C1G2 memory check command - which we analytically and experimentally show to be the best possible downstream verification process based on EPC C1G2; (ii) ability to perform multi-CRFID transfer - which in our experiments speeds up downstream by more than two times compared to sequential transmission; and (iii) the use of compressed data streams - which improves firmware reprogramming times by up to 10% at large reader-to-CRFID distances.@en

We introduce the world's first hybrid radio platform which combines the strengths of active radio (long range and robustness to interference) and Computational RFID (CRFID) (low power consumption). By a set of laboratory experiments, we show that our hybrid radio - composed of Wireless Identification and Sensing Platform (WISP) CRFID radio and Bluetooth Low Energy (BLE) - obtains higher goodput than WISP and lower energy consumption than BLE, both as stand-alone platforms.@en

Computational RFID (CRFID) devices are emerging platforms that can enable perennial computation and sensing by eliminating the need for batteries. Although much research has been devoted to improving upstream (CRFID to RFID reader) communication rates, the opposite direction has so far been neglected, presumably due to the difficulty of guaranteeing fast and error-free transfer amidst frequent power interruptions of CRFID. With growing interest in the market where CRFIDs are forever-embedded in many structures, it is necessary for this void to be filled. Therefore, we propose Wisent - a robust downstream communication protocol for CRFIDs that operates on top of the legacy UHF RFID communication protocol: EPC C1G2. The novelty of Wisent is its ability to adaptively change the frame length sent by the reader, based on the length throttling mechanism, to minimize the transfer times at varying channel conditions. We present an implementation of Wisent for the WISP 5 and an off-the-shelf RFID reader. Our experiments show that Wisent allows transfer up to 16 times faster than a baseline, non-adaptive shortest frame case, i.e. single word length, at sub-meter distance. As a case study, we show how Wisent enables wireless CRFID reprogramming, demonstrating the world's first wirelessly reprogrammable (software defined) CRFID.@en