DESTINY⁺ is an upcoming JAXA Epsilon medium-class mission to fly by the Geminids meteor shower parent body (3200) Phaethon. It will be the world's first spacecraft to escape from a near-geostationary transfer orbit into deep space using a low-thrust propulsion system. In doing so, DESTINY⁺ will demonstrate a number of technologies that include a highly efficient ion engine system, lightweight solar array panels, and advanced asteroid flyby observation instruments. These demonstrations will pave the way for JAXA's envisioned low-cost, high-frequency space exploration plans. Following the Phaethon flyby observation, DESTINY⁺ will visit additional asteroids as its extended mission. The mission design is divided into three phases: a spiral-shaped apogee-raising phase, a multi-lunar-flyby phase to escape Earth, and an interplanetary and asteroids flyby phase. The main challenges include the optimization of the many-revolution low-thrust spiral phase under operational constraints; the design of a multi-lunar-flyby sequence in a multi-body environment; and the design of multiple asteroid flybys connected via Earth gravity assists. This paper shows a novel, practical approach to tackle these complex problems, and presents feasible solutions found within the mass budget and mission constraints. Among them, the baseline solution is shown and discussed in depth; DESTINY⁺ will spend two years raising its apogee with ion engines, followed by four lunar gravity assists, and a flyby of asteroids (3200) Phaethon and (155140) 2005 UD. Finally, the flight operations plan for the spiral phase and the asteroid flyby phase are presented in detail.

@en

DESTINY⁺ is an upcoming JAXA Epsilon medium-class mission to fly by the Geminids meteor shower parent body (3200) Phaethon. It will be the world's first spacecraft to escape from a near-geostationary transfer orbit into deep space using a low-thrust propulsion system. In doing so, DESTINY⁺ will demonstrate a number of technologies that include a highly efficient ion engine system, lightweight solar array panels, and advanced asteroid flyby observation instruments. These demonstrations will pave the way for JAXA's envisioned low-cost, high-frequency space exploration plans. Following the Phaethon flyby observation, DESTINY⁺ will visit additional asteroids as its extended mission. The mission design is divided into three phases: a spiral-shaped apogee-raising phase, a multi-lunar-flyby phase to escape Earth, and an interplanetary and asteroids flyby phase. The main challenges include the optimization of the many-revolution low-thrust spiral phase under operational constraints; the design of a multi-lunar-flyby sequence in a multi-body environment; and the design of multiple asteroid flybys connected via Earth gravity assists. This paper shows a novel, practical approach to tackle these complex problems, and presents feasible solutions found within the mass budget and mission constraints. Among them, the baseline solution is shown and discussed in depth; DESTINY⁺ will spend two years raising its apogee with ion engines, followed by four lunar gravity assists, and a flyby of asteroids (3200) Phaethon and (155140) 2005 UD. Finally, the flight operations plan for the spiral phase and the asteroid flyby phase are presented in detail.

@en

DESTINY+ is a medium-class interplanetary mission, selected by the Japan Aerospace Exploration Agency for potential launch windows in the first half of 2020s. The mission will demonstrate innovative spacecraft subsystem technologies, including a new type of ion engine for future missions. The mission will also collect scientific data through high-speed flyby observations and dust measurements from asteroid (3200) Phaethon and its related body (155140) 2005 UD, to understand their origin and reveal the content of extraterrestrial dust in the context of origin of life. The limited control authority on the spacecraft, the orbits of the target asteroids, and the specific mission requirements pose a challenging task for the trajectory design of DESTINY+. Multiple-target low-thrust optimal trajectories are explored in this paper to fulfill the goals of the DESTINY+ mission. An effective methodology is presented to convert feasible impulsive transfer solutions into low-thrust initial guesses and combine with gravity-assist maneuvers to reveal new high-fidelity optimal trajectories in real ephemeris models. The early mission analysis results demonstrate multitudes of flyby opportunities that provide robustness against programmatic and operational delays in the mission schedule.@en

Solar electric propulsion is a key enabling technology that has improved the efficiency of space transport. With specific impulses that are typically ten times higher than the chemical counterpart, electric motors allow a considerable saving in propellant mass at the expense of longer times of flight. However, the length of the transfer process and the specific operational needs require to develop a different operational concept for the navigation and orbit control that can be sustained during the different phases of the mission. In this paper, a trade-off is performed among several operational concepts and solutions for multi-revolutions SEP transfers with application to the DESTINY⁺ mission. The GTO-to-Moon low-thrust transfer is first computed in a high-fidelity model with a tangential thrust strategy and later optimized with a five-order Legendre-Gauss-Lobatto collocation method. The impact of eclipses, radiation, thrust outages and misfires, and orbit tracking is analyzed in detailed and included in the transcript optimal problem as algebraic constraints where possible. Numerical results show that the driving factors for the optimal trajectory are related to the operations of the spacecraft rather than the final mass or time of flight.

@en

DESTINY⁺ (Demonstration and Experiment of Space Technology for INterplanetary voYage, Phaethon fLyby and dUSt analysis) is a small-sized high-performance deep space vehicle proposed at ISAS/JAXA. The trajectory design of DESTINY⁺ is divided into several phases. First phase is an orbit injection into an extended elliptical orbit launched by the Epsilon rocket with the additional solid kick motor. Second phase is many revolutions transfer to raise apogee altitude by low thrust propulsion system to the moon orbit nearby. And at third phase, the distant flyby and the swing-by around the moon is designed to give DESTINY⁺ momentum to escape Earth gravitational field. At an interplanetary phase, DESTINY⁺ goes to an Asteroid Phaethon for flyby observation. After the Phaethon flyby, DESTINY⁺ is planned to go back toward Earth for gravity assist and go to another asteroid 2005UD which thought to have split from Phaethon. This paper discusses DESTINY⁺'s low-thrust trajectory design. As for the many revolution transfer phase, the low-thrust trajectory is optimized by the multi-objective optimization using genetic algorithm. In this phase, we minimize the time of flight, the passage of time of radiation belt, the work time of low thrust propulsion system and the maximum eclipse period. After the spacecraft reaches to the moon's orbit, it utilizes the moon swing-by several times to connect to the transfer trajectory for Asteroid Phaethon. From these studies, we can show the feasibility of the mission design of DESTINY⁺,.

@en