Existing methods for nonlinear robust control often use scenario-based approaches to formulate the control problem as large nonlinear optimization problems. The optimization problems are challenging to solve due to their size, especially if the control problems include time-varying uncertainty. This paper draws from local reduction methods used in semi-infinite optimization to solve robust optimal control problems with parametric and time-varying uncertainty. By iteratively adding interim worst-case scenarios to the problem, methods based on local reduction provide a way to manage the total number of scenarios. We show that the local reduction method for optimal control problems consists of solving a series of simplified optimal control problems to find worst-case constraint violations. In particular, we present examples where local reduction methods find worst-case scenarios that are not on the boundary of the uncertainty set. We also provide bounds on the error if local solvers are used. The proposed approach is illustrated with two case studies with parametric and additive time-varying uncertainty. In the first case study, the number of scenarios obtained from local reduction is 101, smaller than in the case when all (Formula presented.) extreme scenarios are considered. In the second case study, the number of scenarios obtained from the local reduction is two compared to 512 extreme scenarios. Our approach was able to satisfy the constraints both for parametric uncertainty and time-varying disturbances, whereas approaches from literature either violated the constraints or became computationally expensive.

Existing methods for nonlinear robust control often use scenario-based approaches to formulate the control problem as nonlinear optimization problems. Increasing the number of scenarios improves robustness, while increasing the size of the optimization problems. Mitigating the size of the problem by reducing the number of scenarios requires knowledge about how the uncertainty affects the system. This paper draws from local reduction methods used in semi-infinite optimization to solve robust optimal control problems with parametric uncertainty. We show that nonlinear robust optimal control problems are equivalent to semi-infinite optimization problems and can be solved by local reduction. By iteratively adding interim globally worst-case scenarios to the problem, methods based on local reduction provide a way to manage the total number of scenarios. In particular, we show that local reduction methods find worst case scenarios that are not on the boundary of the uncertainty set. The proposed approach is illustrated with a case study with both parametric and additive time-varying uncertainty. The number of scenarios obtained from local reduction is 101, smaller than in the case when all 2 ¹⁴⁺³× ¹⁹² boundary scenarios are considered. A validation with randomly drawn scenarios shows that our proposed approach reduces the number of scenarios and ensures robustness even if local solvers are used.

A class of data-driven control methods has recently emerged based on Willems' fundamental lemma. Such methods can ease the modeling burden in control design but can be sensitive to disturbances acting on the system under control. In this article, we propose a restructuring of the problem to incorporate segmented prediction trajectories. The proposed segmentation leads to reduced tracking error for longer prediction horizons in the presence of unmeasured disturbance and noise when compared with an unsegmented formulation. The performance characteristics are illustrated in a set-point tracking case study in which the segmented formulation enables more consistent performance over a wide range of prediction horizons. The method is then applied to a building energy management problem using a detailed simulation environment. The case studies show that good tracking performance is achieved for a range of horizon choices, whereas performance degrades with longer horizons without segmentation.

Introducing flexibility in the time-discretisation mesh can improve convergence and computational time when solving differential equations numerically, particularly when the solutions are discontinuous, as commonly found in control problems with constraints. State-of-the-art methods use fixed mesh schemes, which cannot achieve superlinear convergence in the presence of non-smooth solutions. In this paper, we propose using a flexible mesh in an integrated residual method. The locations of the mesh nodes are introduced as decision variables, and constraints are added to set upper and lower bounds on the size of the mesh intervals. We compare our approach to a uniform fixed mesh on a real-world satellite reorientation example. This example demonstrates that the flexible mesh enables the solver to automatically locate the discontinuities in the solution, has superlinear convergence and faster solve times, while achieving the same accuracy as a fixed mesh.

Buildings are responsible for about a quarter of global energy-related CO ₂ emissions. Consequently, the decarbonisation of the housing stock is essential in achieving net-zero carbon emissions. Global decarbonisation targets can be achieved through increased efficiency in using energy generated by intermittent resources. The paper presents a co-design framework for simultaneous optimal design and operation of residential buildings using Model Predictive Control (MPC). The framework is capable of explicitly taking into account operational constraints and pushing the system to its efficiency and performance limits in an integrated fashion. The optimality criterion minimises system cost considering time-varying electricity prices and battery degradation. A case study illustrates the potential of co-design in enhancing flexibility and self-sufficiency of a system operating under different conditions. Specifically, numerical results from a low-fidelity model show substantial carbon emission reduction and bill savings compared to an a-priori sizing approach.

Despite a large body of research, the widespread application of Model Predictive Control (MPC) to residential buildings has yet to be realised. The modelling challenge is often cited as a significant obstacle. This chapter establishes a systematic workflow, from detailed simulation model development to control-oriented model generation to act as a guide for practitioners in the residential sector. The workflow begins with physics-based modelling methods for analysis and evaluation. Following this, model-based and data-driven techniques for developing low-complexity, control-oriented models are outlined. Through sections detailing these different stages, a case study is constructed, concluding with a final section in which MPC strategies based on the proposed methods are evaluated, with a price-aware formulation producing a reduction in operational space-heating cost of 11%. The combination of simulation model development, control design and analysis in a single workflow can encourage a more rapid uptake of MPC in the sector.

We propose an optimization-based method for designing a lower order Luenberger-type state estimator, while providing L₂-gain guarantees on the error dynamics when the estimator is used with the higher order system. Suitable filter parameters can be computed by modelling the bilinear system as a linear differential inclusion and solving a set of bilinear matrix inequality constraints. Since these constraints are nonconvex, in general, we also show that one can solve a suitably defined semi-definite program to compute a bound on the level of suboptimality. The design method also allows one to explicitly take account of linear parameter uncertainties in order to provide a priori robustness guarantees. The H-infinity estimator not only has lower real-time computational requirements compared with a Kalman filter, but also does not require knowledge of the noise spectrum. For a numerical example, we consider the estimation of the radiation force for a wave energy converter, where a low-order model is used to approximate the radiation dynamics.

This paper investigates low-order observer design for bilinear systems with input constraints. A bilinear Luenberger-type observer with an H-infinity performance measure is formulated and the resulting synthesis problem is posed as a matrix inequality optimization for a linear parameter varying system. The resulting (nonconvex) bilinear matrix inequality problem is then solved with an LMI-based algorithm to find low-order nominal and robust quadratically stable observers. The performance of these observers are compared with that of a Kalman filter. In addition to alleviating the need to know the noise spectrum and its lower real-time computational burden, the H-infinity filter is shown to be robust to model uncertainties. The online radiation force estimation problem for a wave energy converter with bilinear dynamics is considered as an example.

This paper investigates optimal active control schemes applied to a point absorber wave energy converter within a receding horizon fashion. A variational formulation of the power maximization problem is adapted to solve the optimal control problem. The optimal control method is shown to be of a bang-bang type for a power takeoff mechanism that incorporates both linear dampers and active control elements. We also consider a direct transcription of the optimal control problem as a general nonlinear program. A variation of the projected gradient optimization scheme is formulated and shown to be feasible and computationally inexpensive compared to a standard NLP solver. Since the system model is bilinear and the cost function is not convex quadratic, the resulting optimization problem is not a quadratic program. Results will be compared with an optimal command latching method to demonstrate the improvement in absorbed power. All time domain simulations are generated under irregular sea conditions.