J.M. Balvers | TU Delft Repository

JB

J.M. Balvers

Conference paper (6)

Doctoral thesis (1)

7 records found

1

In situ strain & cure monitoring in liquid composite moulding by fibre Bragg grating sensors

Doctoral thesis (2014) - J.M. Balvers (author)

Comparing flow-front propagation sensed by FBGs with PAM-RTM simulation

Conference paper (2010) - J.M. Balvers (author), H.E.N. Bersee (author), Harald Bersee (author)

Determination of residual strain in (partially) cured composite using FBG sensors

Conference paper (2010) - J.M. Balvers (author), MA Selezneva (author), H.E.N. Bersee (author), Harald Bersee (author)

Settling of glass woven fabric in steel RTM mould: impact on residual stresses?

Conference paper (2009) - J.M. Balvers (author), H.E.N. Bersee (author), Harald Bersee (author), A. Beukers (author)

Through thickness cure monitoring of thick advanced composites using dielectric sensors

Conference paper (2009) - J.M. Balvers (author), MA Octeau (author), H.E.N. Bersee (author), Harald Bersee (author), A Yousefpour (author)

Determination of cure dependent properties for curing simulation of thick-walled composites

Conference paper (2008) - J.M. Balvers (author), Harald Bersee (author), H.E.N. Bersee (author), K.M.B. Jansen (author), Kaspar M B Jansen (author), Kaspar Jansen (author), A. Beukers (author)

Integration of fiber Bragg gratings in woven fabrics: Influences of preform compaction and flow-front propagation

Conference paper (2008) - J.M. Balvers (author), H.E.N. Bersee (author), Harald Bersee (author), A. Beukers (author)