This paper aims to explore the development of a flight dynamics model for a small-scale side-by-side helicopter and describe its trim and stability characteristics. The helicopter is considered a suitable candidate for Urban Air Mobility (UAM) solutions, because of its reliable design and low noise characteristics, but still very small knowledge is present on the mathematical modeling approaches and dynamic properties. A 14 degrees of freedom nonlinear mathematical model is developed and semi-analytical models are employed to account for the presence of the shrouds. An iterative trim routine is developed and applied with a suitable control mix that allows the use of classic helicopter controls. To control the vertical speed and roll rate, the paper assumes an equal collective pitch and lateral cyclic in the two rotors, while a uniform plus a differential longitudinal cyclic is adopted for pitch and yaw maneuvers. The paper discusses unique characteristics of the side-by-side configuration as obtained from the stability analysis: an unstable high-frequency mode, governed by the vertical velocity and pitch angle arises when the center of gravity (CG) of the vehicle is aligned or placed in front of the two main rotors. Similarly, both lateral phugoid and roll subsidence modes are sensitive to the CG location. The side-by-side configuration presents also a stable spiral mode which needs to be carefully designed.

@en

This paper addresses the flight dynamics modelling, trim, and dynamic analysis of an intermeshing-rotor helicopter, indicated as synchropter. This configuration has gained a great interest for its suitability within heavy load lifting and transportation in extreme high temperature and altitude, and other harsh environments. The paper presents some relevant features related to synchropter's flight dynamics modelling of the interference between its two tilted main rotors. Trim results show the advantage of the synchropter in forward flight where the yawing moment is naturally balanced at almost all speeds and no lateral-directional compensation is needed. The synchropter's dynamic stability shows similarity to a conventional helicopter in the longitudinal phugoid. However, in the lateral phugoid, the synchropter is unstable at all flying speeds and therefore its vertical fin needs to be carefully designed.

@en

In the present paper, a flight dynamics model is adopted to represent the trim and stability characteristics of a side-by-side helicopter in hovering conditions. This paper develops a numerical representation of the rotorcraft behavior and proposes a set of guidelines for trimming and linearizing the highly coupled rotor dynamics derived by the modeling approach. The trim algorithm presents two nested loops to compute a solution of the steady-state conditions averaged around one blade’s revolution. On the other hand, a 38-state-space linear representation of the helicopter and rotor dynamics is obtained to study the effects of flap, lead–lag, and inflow on the overall stability. The results are compared with an analytical framework developed to validate the rotorcraft stability and compare different modeling approaches. The analysis showed that non-uniform inflow modeling led to a coupled longitudinal inflow–phugoid mode which made the vehicle prone to dangerous instabilities. The flap and lead–lag dynamics introduced damping in the system and can be considered beneficial for rotor dynamics@en