Electric cooking (or e-cooking) based on renewable sources and highly-efficient cooking devices could represent a sustainable and reliable option to achieve the universal access to clean cooking facilities by 2030. Still, the techno-economic feasibility of e-cooking has never been evaluated through (i) a high-resolution assessment of the electric and cooking load profiles, coupled with (ii) a least-cost energy system optimisation for the related electricity supply. Hence, the present study aims at accurately investigating the techno-economic potential of a fully-renewable solar micro-grid, ensuring an integrated access to electricity and clean cooking, based on two representative case studies in Tanzania, namely: (i) a residential case study, and (ii) a community-service case study. Bottom-up stochastic load profiles are generated for the two contexts by expanding the existing LoadProGen model with a novel complementary algorithm for the computation of high-resolution cooking loads. The cost-optimised results prove the cost-competitiveness of e-cooking, especially for the community-service case, where it would require only an additional 17% capital investment due to the pre-existence of other energy-intensive activities. Moreover, the range of Levelised Cost for Cooking a Meal (LCCM) obtained for e-cooking considering the different scenarios lies within 0.16 ÷ 0.70 USD/kWh, a range that is comparable with that of all other cooking options – including firewood – and even more cost-competitive than LPG.

@en

Efforts towards ensuring clean and affordable electricity for all have been progressing slowly in rural, off grid areas of developing countries. In this context, hybrid microgrids may offer reliable and potentially clean electricity for isolated locations. Nevertheless, the process of planning and operation of these systems faces several challenges, often due to the uncertainties related to the renewable resources and to the stochastic nature of electricity consumption in rural contexts. This paper tackles this problem and contributes to the literature in bridging the gap between field practices and two-stage stochastic modeling approaches by identifying an open-source modeling framework which is then applied to real local data. As reference case-study, we consider a microgrid built in 2015 in Bolivia. Overall, the optimal system results from a compromise between the Net Present Cost, the peak capacity installed and the flexibility (to balance variable generation). Different approaches to size isolated microgrids are tested, with the conclusion that methods accounting for the uncertainty in both demand and renewable generation may lead to a more robust configuration with little impacts on the final cost for the community.@en

Improved Cooking Stoves (ICSs) represent the most commonly promoted solution to alleviate the burden associated with the use of traditional biomass in a short-term perspective. However, criticism is raising about the methodologies used for assessing their performance, with a particular focus on laboratory-based testing protocols. One of the key weaknesses of current protocols consists in the inaccurate and biased approach adopted for reporting and statistically analysing test results, which can lead to misleading conclusions about the actual improvements ensured by ICSs. This study proposes a robust procedure to deal with the statistical analysis of small sample sizes, and subsequently verify it through its application to an experimental comparison – based on the Water Boiling Test – between three models of stove. The results show that the current practice based on 3 or 5 replicates often produces biases in the analyses, as at least 13 replicates might be needed to achieve reliable results. Moreover, the study shows how the t-test is in most cases improperly applied, while the proposed procedure allows to deal both with normally and of non-normally distributed data sets in a robust way. In one case, the apparent improvement of an ICS model as compared to the three-stone fire, is refuted by the application of our procedure.@en

Around 2.7 billion people rely on biomass fuelled inefficient devices for cooking and heating. Improved Cooking Stoves are promoted as a means to mitigate the economic, environmental and social implications of this practice. However, their diffusion is hindered by a number of factors, including in particular the lack of agreement on performance evaluation methodologies. Laboratory protocols are designed to give useful indications to cookstoves developers, in order to improve their performance under controlled conditions, while field protocols provide the assessment of real performance of a cookstove in a given context. However, due to high time and finance requirements of the latter, lab results are often used also for stoves selection, also because of a general misunderstanding regarding their correct utilisation. In this work, we provide a review of all lab protocols officially published to date, comparing conceptual and technical aspects. We find that no protocol takes into account all the relevant factors at once. As a result, lab tests carry little information about real field performance, and can be misleading regarding stoves optimisation. Therefore, the analysis reveals the need to define better standards, regarding: (i) repeatability, metrics and statistical analysis of results; (ii) burn sequences calibrated from time to time according to the specific user.@en

The performance indicators of Improved Cook Stoves (ICSs) for Developing Countries are commonly evaluated and compared using the arithmetic average of replicated tests performed using a standardized laboratory-based test, commonly the Water Boiling Test (WBT). Possibility theory is here employed to examine energy data retrieved from the WBT-based literature regarding the results of laboratory tests on ICSs and traditional Three-Stone Fire (TSF) stoves; fifty-seven comparisons of stoves are analysed. Chebyshev and uniform possibility distributions are employed to represent energy data affected by epistemic uncertainty. The extension principle of fuzzy set theory is applied to obtain possibility distributions of the saving of fuel use parameter for each comparison of cookstoves. The results indicate that at 90%, 95% and 99% degree of confidence, only 22.22%, 15.00% and 15.00% of all the supposed “improved” stoves emerged respectively as real ICSs at most, while the percentage of “improved” stoves obtained by considering the mean values of the WBT is among 3 and 6 times higher than the percentage resulted by taking into account the epistemic uncertainties. The work suggests how neglecting intrinsic uncertainties of tests’ results might lead to misinterpret and report non-comprehensive information about ICSs’ thermal energy performance, and to reveal some concerns about their effective improvements over traditional devices.@en