The chemical industry is of paramount importance to the world economy and this industrial sector represents a substantial income source for developing countries. However, the chemical plants producing inside an industrial district pose a great threat to the surrounding atmospheric environment and human health. Therefore, designing an appropriate and available air quality monitoring network (AQMN) is essential for assessing the effectiveness of deployed pollution-controlling strategies and facilities. As monitoring facilities located at inappropriate sites would affect data validity, a two-stage data-driven approach constituted of a spatio-temporal technique (i.e. Bayesian maximum entropy) and a multi-objective optimization model (i.e. maximum concentration detection capability and maximum dosage detection capability) is proposed in this paper. The approach aims at optimizing the design of an AQMN formed by gas sensor modules. Owing to the lack of long-term measurement data, our developed atmospheric dispersion simulation system was employed to generate simulated data for the above method. Finally, an illustrative case study was implemented to illustrate the feasibility of the proposed approach, and results imply that this work is able to design an appropriate AQMN with acceptable accuracy and efficiency.

Locating and quantifying the emission source plays a significant role in the emergency management of hazardous gas leak accidents. Due to the lack of a desirable atmospheric dispersion model, current source estimation algorithms cannot meet the requirements of both accuracy and efficiency. In addition, the original optimization algorithm can hardly estimate the source accurately, because of the difficulty in balancing the local searching with the global searching. To deal with these problems, in this paper, a source estimation method is proposed using an artificial neural network (ANN), particle swarm optimization (PSO), and a simulated annealing algorithm (SA). This novel method uses numerous pre-determined scenarios to train the ANN, so that the ANN can predict dispersion accurately and efficiently. Further, the SA is applied in the PSO to improve the global searching ability. The proposed method is firstly tested by a numerical case study based on process hazard analysis software (PHAST), with analysis of receptor configuration and measurement noise. Then, the Indianapolis field case study is applied to verify the effectiveness of the proposed method in practice. Results demonstrate that the hybrid SAPSO algorithm coupled with the ANN prediction model has better performances than conventional methods in both numerical and field cases.