Live Transitioning of two Series-Parallel-Output Dual Active Bridge Converters

Master thesis (2023)

Authors

K.S.J. Linders Electrical Engineering, Mathematics and Computer Science

Contributors

G.R. Chandra Mouli DC systems, Energy conversion & Storage - (mentor)

P. Bauer DC systems, Energy conversion & Storage - (graduation committee member)

S.S. Shinde DC systems, Energy conversion & Storage - (coach)

Faculty

Electrical Engineering, Mathematics and Computer Science, Electrical Engineering, Mathematics and Computer Science

Power Electronics DC-DC converter EV Chargers EVs DAB converter Live Transition Reconfigurable Modulation TPS

To reference this document use:

http://resolver.tudelft.nl/uuid:e44751f5-3934-4b0e-98e8-80cb46e882d2

More Info

expand_more

Published Date

18-07-2023

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Electrical Engineering, Mathematics and Computer Science

Abstract

The transportation sector is moving towards a green future with a rapidly growing EV market and consequently, the demand for EV chargers is rising too. With the increased interest in 800V batteries and the current presence of 400V and 600V batteries, the voltage range for EV chargers is wide (150V-1000V). In this thesis, a wide-output EV charger based on two DAB converters with series-parallel output is proposed. A novel method of reconfiguration is introduced to allow live transitioning between series and parallel mode. The circuit of a 25kW converter is optimized to achieve optimal efficiency during a charging cycle. A comparison between advanced DAB modulation strategies is made and Triple Phase Shift (TPS) modulation in combination with Minimum Current Stress Optimization (MCSO) improves the efficiency of the DAB at low voltage and low power operation. The converter operates at >97.6% efficiency in the full range of 150V-1000V with a peak efficiency of 98.8%. A 25kW converter is modelled and simulated in PLECS, and a 200W hardware prototype is built to verify the new method for live transitioning.

Files

Thesis_KoenLinders.pdf

(pdf | 9.88 Mb)

- Embargo expired in 18-07-2024

Unknown license