A 94.1 dB DR 4.1 nW/Hz Bandwidth/Power Scalable DTDSM for IoT Sensing Applications Based on Swing-Enhanced Floating Inverter Amplifiers

Conference paper (2021)

Authors

Yibo Zhao Zhejiang University
H. Zhang Electronic Instrumentation - EEMCS
Yaopeng Hu Zhejiang University
Yuanxin Bao Peking University
Le Ye Zhejiang University
Wanyuan Qu Zhejiang University
Menglian Zhao Zhejiang University
Zhichao Tan Zhejiang University
Research Group
Electronic Instrumentation (EEMCS) (TU Delft)
More Info
expand_more

Published Date

2021

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Electrical Engineering, Mathematics and Computer Science

Department

Microelectronics

Research Group

Electronic Instrumentation

Abstract

IoT sensing applications operating from batteries or harvested energy require microwatt data converters. To accurately measure small signals, they often need to achieve a high DR (>90dB) and better linearity than the transducers themselves (>14b) with a BW in the kHz range. IoT systems also often consist of multiple sensing modalities with different BW requirements and are often heavily duty-cycled to reduce power consumption. This paper presents a fully dynamic discrete-time delta-sigma modulator (DTDSM) that supports 4x bandwidth/power scaling without any programming overhead except for changing fs, using a capacitively biased swing-enhanced floating inverter amplifier (SEFIA). The prototype, fabricated in 180nm CMOS, consumes only 4μW at 800Hz BW and achieves >87dB SNDR over 2 octaves of fs, between 100 kHz and 400 kHz, and a DR of 94.1 dB while operating with an OSR of 125.

Files

A_94.1_dB_DR_4.1_nW_Hz_Bandwid... (pdf)
(pdf | 0.66 Mb)
Unknown license

Download not available