Struvite crystallization under a marine/brackish aquaculture condition

Journal article (2016)

Authors

X. Zhang Sanitary Engineering - CEG
H. Spanjers Sanitary Engineering - CEG
J.B. van Lier Sanitary Engineering - CEG
Research Group
Sanitary Engineering (CEG) (TU Delft)
More Info
expand_more

Published Date

2016

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Civil Engineering & Geosciences

Department

Water Management

Research Group

Sanitary Engineering

Abstract

The results in this study show that struvite was formed in the digester at pH 7.7 due to the magnesium naturally present and the released ammonia and phosphate, resulting in low phosphate concentration in the digester. Apparently the digester already provided proper conditions for struvite formation. Under the brackish condition, the estimated thermodynamic solubility product and enthalpy change of struvite formation were 10 13.06 and 25.7 kJ mol 1, respectively. The average crystal size under marine/brackish condition decreased with pH, but increased with temperature. X-ray diffraction measurements indicate struvite (NH4MgPO4 6H2O) and dittmarite (NH4MgPO4 H2O) were predominant phosphorus species produced in filtrates of the digester. However, struvite and newberyite (HMgPO4 3H2O) were the predominant species precipitated from synthetic brackish waters after dosing MgCl2. It is pronounced that (waste)water characteristics played also an important role on the nature of phosphate precipitates. Under high NH4 + condition, phosphorus precipitates containing ammonia were dominant, compared to other amorphous phosphates.