Hydrometallurgical extraction of rare earth elements from low grade mine tailings

Peelman, S.; Sun, Z.; Sietsma, J.; Yang, Y.

Hydrometallurgical extraction of rare earth elements from low grade mine tailings

Conference paper (2016)

Authors

S. Peelman (OLD) MSE-3

Z. Sun (OLD) MSE-3

J. Sietsma (OLD) MSE-3

Y. Yang (OLD) MSE-3

Research Group

(OLD) MSE-3

Rare earths Apatite Phosphoric acid production Low grade REE resources

To reference this document use:

http://resolver.tudelft.nl/uuid:5c83670b-fa8f-4294-91eb-de23c9a7ec70

More Info

expand_more

Published Date

2016

Language

English

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Research Group

(OLD) MSE-3

Abstract

The rare earth elements (REEs) present in the Kiruna iron ore mine tailings are being considered as a new REE resource for the EU. These tailings, after beneficiation, contain approximately 5000 ppm of rare earths, concentrated in apatite and monazite minerals. To economically extract the REEs from these tailings the phosphorous contained within the apatite must also be extracted and the waste production of the process should be minimal. To achieve the extraction of REEs and phosphorous HCl and HNO3 were investigated as possible leaching agents. Based on the results a leaching process using HNO3 is proposed. This process produces H3PO4 from the apatite while simultaneously dissolving the REEs. The resulting leach liquor is then cooled to remove the unwanted Ca as Ca(NO3)2. Analysis of the leach liquor reveals extraction ratios of between 75% and 100% for the heavy REE (e.g. Y, Eu, Dy, …) and below 40% from the light REEs (i.e. Ce, La). Full phosphorous extraction was also achieved.