The negative environmental effects of large-scale use of fossil fuels, chemicals, and energy-intensive processes are forcing us to develop green alternatives to mitigate the climate crisis. Electrochemistry, powered by renewable energy, provides us with a direct way to produce precursors or materials from green electricity and benign reagents such as water, carbon dioxide (CO2), or oxygen. A widely known example is water electrolysis to produce hydrogen as a green fuel and chemical building blocks for other chemicals. Alternatively, CO2 can be fed to an electrolyzer to produce sustainable carbon-based materials - such as pharmaceuticals, paints, and synthetic fuels - that are otherwise obtained from fossil fuels. Electrochemistry is therefore a versatile and promising technology that could provide a strong foundation for sustainable alternatives to various environmentally unfriendly processes.
Because electrochemical systems are often studied as replacements for well-established and optimized industrial processes, the benchmarks to achieve an economically viable and competitive status are high. Most importantly, the processes must be efficient with materials and energy,
resulting in requirements such as high current density, energy efficiency and product selectivity. These are hampered in many systems by poor solubility of reagents in water, such as the aforementioned CO2 and oxygen. The low reagent concentration results in reagent depletion, intensified competition with parasitic side reactions, and low selectivity at industrially relevant current densities. Such systems are severely limited by the slow mass transport and availability of reagents towards and at the electrode surface.@en

CO2 conversion is an important part of the transition towards clean fuels and chemicals. However, low solubility of CO2 in water and its slow diffusion cause mass transfer limitations in aqueous electrochemical CO2 reduction. This significantly limits the partial current densities towards any desired CO2-reduction product. We propose using flowable suspension electrodes to spread the current over a larger volume and alleviate mass transfer limitations, which could allow high partial current densities for CO2 conversion even in aqueous environments. To identify the requirements for a well-performing suspension electrode, we use a transmission line model to simulate the local electric and ionic current distributions throughout a channel and show that the electrocatalysis is best distributed over the catholyte volume when the electric, ionic and charge transfer resistances are balanced. In addition, we used electrochemical impedance spectroscopy to measure the different resistance contributions and correlated the results with rheology measurements to show that particle size and shape impact the ever-present trade-off between conductivity and flowability. We combine the modelling and experimental results to evaluate which carbon type is most suitable for use in a suspension electrode for CO2 reduction, and predict a good reaction distribution throughout activated carbon and carbon black suspensions. Finally, we tested several suspension electrodes in a CO2 electrolyzer. Even though mass transport limitations should be reduced, the CO partial current densities are capped at 2.8 mA cm−2, which may be due to engineering limitations. We conclude that using suspension electrodes is challenging for sensitive reactions like CO2 reduction, and may be more suitable for use in other electrochemical conversion reactions suffering from mass transfer limitations that are less affected by competing reactions and contaminations.@en

Electrochemical oxygen reduction is a promising and sustainable alternative to the current industrial production method for hydrogen peroxide (H₂O₂), which is a green oxidant in many (emerging) applications in the chemical industry, water treatment, and fuel cells. Low solubility of O₂ in water causes severe mass transfer limitations and loss of H₂O₂ selectivity at industrially relevant current densities, complicating the development of practical-scale electrochemical H₂O₂ synthesis systems. We tested a flow-by and flow-through configuration and suspension electrodes in an electrochemical flow cell to investigate the influence of electrode configuration and flow conditions on mass transfer and H₂O₂ production. We monitored the H₂O₂ production using Cu-tmpa (tmpa = tris(2-pyridylmethyl)amine) as a homogeneous copper-based catalyst in a pH-neutral phosphate buffer during 1 h of catalysis and estimated the limiting current density from CV scans. We achieve the highest H₂O₂ production and a 15-20 times higher geometrical limiting current density in the flow-through configuration compared to the flow-by configuration due to the increased surface area and foam structure that improved mass transfer. The activated carbon (AC) material in suspension electrodes, which have an even larger surface area, decomposes all produced H₂O₂ and proves unsuitable for H₂O₂ synthesis. Although the mass transfer limitations seem to be alleviated on the microscale in the flow-through system, the high O₂ consumption and H₂O₂ production cause challenges in maintaining the initially reached current density and Faradaic efficiency (FE). The decreasing ratio between the concentrations of the O₂ and H₂O₂ in the bulk electrolyte will likely pose a challenge when proceeding to larger systems with longer electrodes. Tuning the reactor design and operating conditions will be essential in maximizing the FE and current density.

@en