Elevated Work Platforms (EWP) have been implemented as a measure to prevent falls. However, fatalities and injuries relating to EWP use are of concern within the construction industry, with crushing risks often a significant factor in operator fatalities. With a greater number of workers using these machines internationally, it is imperative to develop policies and strategies to guarantee the safe use of EWPs. One key issue is that EWP familiarisation has been primarily centred on the user manual. However, it is unclear if user manuals are an adequate source of education and training in terms of content and readability. To address this research gap, a content analysis was used to assess the differences in content and readability among the manuals of the most used EWPs in Australia. The qualitative findings showed that there are nine safety-related themes in the user manuals, such as control warnings and in-basket safety. The quantitative analysis found that some manuals require several years of education above that recommended for a universal audience (>8 years) to be understood. This finding calls for better training and education across the range of EWP control layouts and standardisation across the methods by which the manuals convey control information to reduce the cognitive load placed on operators to remember and accurately utilise the controls of the wide variety of existing EWPs.@en

Advanced Driver Assistance Systems (ADAS) are being developed and installed in increasing numbers. Some of the most popular ADAS include blind spot monitoring and cruise control which are fitted in the majority of new vehicles sold in high-income countries. With more drivers having access to these technologies, it is imperative to develop policy and strategies to guarantee the safe uptake of ADAS. One key issue is that ADAS education has been primarily centred on the user manual which are not widely utilised. Moreover, it is unclear if user manuals are an adequate source of education in terms of content and readability. To address this research gap, a content analysis was used to assess the differences in ADASrelated content and readability among the manuals of the highest selling vehicles in Australia. The qualitative findings showed that there are seven themes in the user manuals: differences between driving with and without ADAS, familiarisation requirements, operational limits of the ADAS, potential ADAS errors, behaviour adaptation warnings, confusion warnings, and malfunction warnings. The quantitative analysis found that some of the manuals require several years of education above the recommended for a universal audience (>8 years) to be understood. Additionally, there is a notable number of text diversions and infographics which could make comprehension of the user manual difficult. This investigation shows that there is a lack of standardisation of ADAS user manuals (in both content and delivery of information) which requires regulatory oversight. Driver ADAS education needs to be prioritised by policymakers and practitioners as smart technology continues to increase across the transport system. It seems that current strategies based on user manuals are insufficient to achieve successful adoption and safe use of these technologies. @en

The nature of the road environment requires drivers to be vigilant and attentive. Distracted driving is a primary concern, as it threatens the safety of road users. However very little research has been conducted into interventions to combat such an issue. Existing interventions such as police enforcement and legislation appear to have limited effect. The use of mobile phone applications to assist in limiting driver distraction is an alternative intervention that is currently gaining traction. With a great array of potential benefits, such as reducing road toll, these applications can be readily available to all road users. Despite the positive implications, it is vital that drivers accept the use of such a technology for the intervention to be effective. Therefore, understanding driver acceptance is an important step in implanting such applications. To assess this, the present study examines the utility of two versions of the Technology Acceptance Model (TAM), the Theory of Planned Behaviour (TPB) and the Unified Theory of Acceptance and Use of Technology (UTAUT) for understanding the acceptance of technology designed to reduce distraction. Participants were presented with two different applications and responded to questions that indicated their attitudes towards the factors included in the TAM, TPB and UTAUT, alongside their intent to use the technology. A total of 731 participants responded to the survey, and their responses analysed. The results indicated that overall, Davis’ (1985) TAM was slightly better in explaining behavioural intent for both Mobile Phone Application (MPA) 1 and MPA 2, explaining 66.1% and 68.7% of the variance, respectively. Davis’ (1989) TAM and the TPB were close behind, while the UTAUT explained the least variance in behavioural intent of all the models. Overall, the findings of this study provide support for using psychological theories to assess the acceptance of mobile phone applications.@en