In this contribution, a broadband G-band leaky-wave (LW) fed lens antenna with an integrated dielectric grid polarizer is presented. The proposed wideband polarizer unit cell geometry enables its fabrication at frequencies higher than 100 GHz, presenting high transmission properties and low axial ratio (AR). A quasi-Analytic technique based on multilayer spectral Green's function combined with a numerical Floquet modes' solver is used to optimize the lens aperture efficiency and AR. The proposed technique is validated via full-wave (FW) simulations. A design is proposed in low dielectric permittivity material, achieving FW simulated aperture efficiency higher than 75% over 44% relative bandwidth, and an AR lower than 3 dB over 35% relative bandwidth. The antenna is able to achieve multiple directive circularly polarized (CP) beams when fed by a focal plane array, preserving the AR bandwidth. A prototype has been fabricated and measured, exhibiting an excellent agreement with quasi-Analytic and FW simulations.

A high-gain broadband leaky-wave fed lens antenna with an integrated dielectric gratings polarizer covering the whole G-band (140-220GHz) is presented. This work focuses on the polarizer gratings manufacturing and in particular on the selection of plastic materials and the fabrication process refinement. The polarizer geometry has been designed and optimized to be compatible with standard milling techniques. A quasi-analytical method based on an analysis of the lens antenna in reception is used to validate the in-lens polarizer performance. Several prototypes have been fabricated, finally obtaining an excellent match between measurements and quasi-analytical results.

The exponentially increasing demand for highspeed wireless links can be only efficiently satisfied with the development of future XG wireless communication networks, based on higher carrier signal frequencies, starting from 100 GHz. In this contribution, a circularly polarized G-band leaky-wave fed lens antenna with an integrated dielectric grid polarizer is presented, which can fulfill the challenging requirements for these future XG networks. A design is proposed in low dielectric permittivity material with a feed matching better than -10dB over a 44 % of relative bandwidth. The circularly polarized lens aperture efficiency is higher than 75% over a 35 % relative bandwidth, with an axial ratio lower than 3dB. Analytical tools have been applied to optimize the lens aperture efficiency, validating the results via full wave simulations. A lens prototype has been now fabricated and is currently being measured.