The thermal volumetric behaviour of soils plays a critical role in designing energy geostructures, withstanding temperature fluctuations. This study examined, for the first time, the thermal deformation of the partially saturated kaolin clay (matric suction of 0–300 kPa) within the operating temperature range of energy geostructures (8 °C to 45 °C), subjected to varying most recent stress histories (normal stress of 0–400 kPa). The thermal cycle has been applied to samples with identical hydro-mechanical stress histories initiated by heating or cooling from room temperature. Scanning electron microscopy (SEM) tests have been performed to investigate the impact of temperature on soil microstructure as a potential determining mechanism of thermal deformation. The volumetric deformation associated with thermal cycles is analysed, considering the concurrent role of the overconsolidation ratio and the most recent stress. Secondary thermal consolidation (i.e., particle rearrangement) mainly depends on the most recent stress history, occurring only in samples heated beyond the yield limit, with cooling preventing secondary thermal consolidation. A clear relationship between thermal volume change and matric suction was observed, with higher matric suction resulting in less pronounced particle rearrangement. Further SEM analysis revealed that heating beyond the yield limit alters the soil microstructure permanently, with cooling showing no impact.@en

Energy geostructures have been identified as a cost-effective mitigating strategy for the adverse impact of climate change. Operation of energy geostructures results in temperature fluctuation and subsequent water migration, particularly at the soil–structure interface, determining the shear response of soil and soil–structure interface. This state-of-the-art paper brings together experimental data from direct shear tests carried out on the soil–structure interface from several laboratory investigations, presenting a comprehensive review to gain a thorough understanding of the interface response in different thermo-hydro-mechanical states, which is critical in the analysis and design of energy geostructures. First, the evolution of shear strength parameters, i.e., adhesion and friction angle, with matric suction and temperature, are investigated. Then, a more detailed analysis of the impact of matric suction and temperature on the shear strength of the soil–structure interface is provided. Furthermore, a comprehensive discussion is provided in this section on the role of the most recent stress history in determining the non-isothermal shear strength of an interface. Data on the effect of matric suction and temperature on shear parameters of the corresponding fundamental soil is reviewed as a reference to the interface behaviour throughout the study, revealing potential underlying mechanisms. In general, a higher matric suction results in higher shear strength of the interface, whereas non-isothermal variations in adhesion and friction angle may lead to a higher or lower shear strength of a saturated interface.@en

In unsaturated soil mechanics, the soil–water retention curve (SWRC) continues to play an important role, since it provides the necessary links between the properties and behaviour of unsaturated soils with a variety of engineering challenges. The temperature has been identified as the main factor influencing SWRC as compared to a variety of other parameters. The goal of this research is to describe theoretical and experimental aspects of the temperature effect on unsaturated soil water retention phenomena. Theoretically, a brief review of the constitutive laws governing the thermal-hydro-mechanical (THM) behaviour of unsaturated soils is presented, along with links between variations in suction with water content, temperature, and void ratio. It also provides a broad framework that would to be well adapted to describing many specific circumstances. Through a closed-form predictive relationship that is developed in this framework, the effect of temperature is examined. By using this relationship, the soil–water retention curve at arbitrary temperature could be determined from one at a reference temperature, therefore significantly decreasing the number of tests necessary to describe the thermo-hydro-mechanical behaviour of a soil. Besides, the SWRC of kaolinite clay was also measured at three different temperatures in an experimental program. The test findings reveal that when the temperature rises, the SWRC decreases significantly. The experimental results were then integrated with sixteen other available data sets covering a wide range of soil types, densities, and suction to create a complete verification program for analytical models. The proposed model has a good performance and reliability in forecasting the fluctuation of non-isothermal SWRC than any existing model, according to statistical assessment results. The analytical model can be used to examine the thermo-hydro-mechanical characteristics of unsaturated soils in numerical simulations.@en

In unsaturated soil mechanics, the soil-water retention curve (SWRC) continues to play an important role, since it provides the necessary links between the properties and behaviour of unsaturated soils with a variety of engineering challenges. Temperature is acknowledged as one of the most influencial variables on the change of SWRC when compared to several other parameters. The goal of this research is to describe theoretical and experimental elements of the temperature effect on unsaturated soil water retention phenomena. Surface tension, contact angle, void ratio, particle size, and water density are five temperature-dependent factors that were accounted for in a closed-form model of non-isothermal SWRC. The SWRC of kaolinite clay was also measured at three different temperatures in an experimental program. The test findings reveal that when the temperature rises, the SWRC decreases significantly. The experimental results were then integrated with sixteen other available data sets covering a wide range of soil types, densities, and suction to create a complete verification program for analytical models. The proposed model has a good performance and reliability in forecasting the fluctuation of non-isothermal SWRC than any existing model, according to statistical assessment results. The analytical model can be used to examine the thermo-hydro-mechanical characteristics of unsaturated soils in numerical simulations. @en