The significant uncertainty associated with current nanodevices fabrication and operation, calls for a circuit design paradigm change, which ought to actively embrace the inherently nanodevice unreliability to generate overall circuit architectures able to perform reliable computation. While for data storage units viable solutions exist, Data Processing Units (DPUs) are not amenable to a similar line of reasoning. The typical approach undertaken for fault-tolerant DPUs relies on modular redundancy (e.g., spatial, temporal), which while being effective from an error tolerance perspective, generally involves high area and/or performance impairments. This paper proposes a generic methodology to obtain reliable DPU implementations built with unreliable components by intimately intertwining Error Correcting Codes (ECCs) codecs with the DPU functionality. The ECC protected DPU architecture is derived cluster-wise with area and reliability constraints, by exploiting dependence relations (logical and w.r.t. shared area) between internal signals pertaining to the DPU and the ECC codec. To evaluate the error rate and performance implications, a multitude of test corners were considered (e.g., gate criticality, ECC type and structure, faulty and low complexity decoder, time-space redundancy) for an ECC protected 6-bit adder architecture. Simulation results reveal that the ECC embedding approach can be effective from both error rate and area perspective, for the Pareto designs with performance figures of merit situated in-between consecutive modular redundancy based design corresponding curves. The proposed approach is generic from the coding point of view, scalable, and enables a fine grained control of the DPU desired reliability degree and area overhead. @en

In this paper, we propose a layered LDPC decoder architecture targeting flexibility, high-throughput, low cost, and efficient use of the hardware resources. The proposed architecture provides full design time flexibility, i.e., it can accommodate any Quasi-Cyclic (QC) LDPC code, and also allows redefining a number of parameters of the QC-LDPC code at the run time. The main novelty of the paper consists of: a new low-cost processing unit that merges the logical functionalities of the Variable-Node Unit (VNU) and the A Posteriori Log-Likelihood Ratio (AP-LLR) unit in an efficient way, a high speed, low-cost Check-Node Unit (CNU) architecture, which is executed twice at each iteration in order to complete the computation of the check-node messages, a splitting of the iteration processing in two perfectly symmetric stages, executed in two consecutive clock cycles, each one using exactly the same processing resources, the processing load is perfectly balanced between the two clock cycles, thus yielding an optimal clock frequency. Synthesis results targeting a 65nm CMOS technology for a (3,6)-regular (648,1296) Quasi-Cyclic LDPC code and for the WiMax (1152,2304) irregular QC-LDPC code show significant improvements in terms of area and throughput compared to the baseline architecture discussed in this paper, as well as several state of the art implementations.@en