We analyze the effects of mechanical stresses arising in a solid polymer electrolyte (SPE) on the electrochemical performance of the electrolyte component of a lithium ion battery. The SPE is modeled with a coupled ionic conduction-deformation model that allows to investigate the effect of mechanical stresses induced by the redistribution of ions. The analytical solution is determined for a uniform planar cell operating under galvanostatic conditions with and without externally induced deformations. The roles of the polymer stiffness, internally-induced stresses, and thickness of the SPE layer are investigated. The results show that the predictions of the coupled model can strongly deviate from those obtained with an electrochemical model—up to +38% in terms of electrostatic potential difference across the electrolyte layer—depending on the combination of material properties and geometrical features. The predicted stress level in the SPE is considerable as it exceeds the threshold experimentally detected for irreversible deformation or fracture to occur in cells not subjected to external loading. We show that stresses induced by external solicitations can reduce the concentration gradient of ions across the electrolyte thickness and prevent salt depletion at the electrode-electrolyte interface.@en

The study explores the use of a composite, graphitic carbon (GC) – sulfur (S) based cathode in laminated structural batteries. Specifically, failure by delamination is studied with regards to the applicability of a double-walled tube architecture obtained by coating the inner surfaces of hollow carbon nanofibers with sulfur. Differences between the material responses of various Li_X S (X ∈ (0, 2)) compounds under bulk-like and interface confined conditions are discussed in terms of the shear response of physically and chemically bonded interfaces, formed with non-functionalized and H/OH/O-functionalized GC surfaces. The study indicates that only a chemically bonded interface with non-functionalized GC yields bulk-compatible mechanical behavior, with the exception of concentrations of X ∈ (0.8, 1.1). To strengthen the interface at low Li concentrations, at which a pronounced inhomogeneity in mass density in terms of interface debonding occurs, a modified transition layer was tested. The results indicate a distinct improvement in terms of homogeneity of mass density and plastic strain localization. The effect of delithiation at high rates on the interface structural stability is investigated at different concentrations of Li in structures of initially uniform Li distribution. According to the results, delamination failure is likely to occur.

@en

We report the results of a computational study regarding the mechanical properties of a lithiated Si/SiO2 interface using reactive molecular dynamics. The study is motivated by an intended application of SiO2-coated Si
nanotubes as fibers in structural batteries with a fiber-reinforced composite architecture while serving as anodes. According to the results, main failure properties due to partly irreversible bond breakage during mechanical deformation are identified, indicating agreement with bond energy/bond order based estimates. Microscopic failure properties are also identified and interpreted in view of the observed processes of bonding degradation. In particular, the effect of Li distribution on the shear deformation response is evaluated as significant.@en

This reactive molecular dynamics study explores the salt concentration dependence of the viscoelastic and mechanical failure properties of a poly(propylene glycol)/LiPF₆-based solid polymer electrolyte (SPE) at a graphitic carbon electrode interface. To account for the finite-size effect of interface-confined SPE films, the properties of two distinct film thicknesses are compared with the respective bulk properties. Additionally, the effect of uniaxial compression in the interface-normal direction on free energy profiles of Li-ion SPE-desolvation is studied.

@en