Utilizing wind hovering techniques of soaring birds can save energy expenditure and improve the flight endurance of micro air vehicles (MAVs). Here, we present a novel method for fully autonomous orographic soaring without a priori knowledge of the wind field. Specifically, we devise an Incremental Nonlinear Dynamic Inversion (INDI) controller with control allocation, adapting it for autonomous soaring. This allows for both soaring and the use of the throttle if necessary, without changing any gain or parameter during the flight. Furthermore, we propose a simulated-annealing-based optimization method to search for soaring positions. This enables for the first time an MAV to autonomously find a feasible soaring position while minimizing throttle usage and other control efforts. Autonomous orographic soaring was performed in the wind tunnel. The wind speed and incline of a ramp were changed during the soaring flight. The MAV was able to perform autonomous orographic soaring for flight times of up to 30 minutes. The mean throttle usage was only 0.25% for the entire soaring flight, whereas normal powered flight requires 38%. Also, it was shown that the MAV can find a new soaring spot when the wind field changes during the flight.

@en

We present a novel controller for fixed-wing UAVs that enables autonomous soaring in an orographic wind field, extending flight endurance. Our method identifies soaring regions and addresses position control challenges by introducing a target gradient line (TGL) on which the UAV achieves an equilibrium soaring position, where sink rate and updraft are balanced. Experimental testing validates the controller's effectiveness in maintaining autonomous soaring flight without using any thrust in a non-static wind field. We also demonstrate a single degree of control freedom in a soaring position through manipulation of the TGL.

@en

Applications of Unmanned Aerial Vehicles (UAVs) are often limited by flight endurance. To address the limitation of endurance, we propose a regenerative soaring method in this paper. The atmospheric energy from updrafts generated by obstacles such as hills and ships can be harvested by UAVs using a regenerative electric drivetrain. With fixed-wing aircraft, the vehicle can hover with specific wind conditions, and the battery can be recharged in the air while wind hovering. In order to research the feasibility of this regenerative soaring method, we present a model to estimate hovering locations and the amount of extractable power using the proposed method. The resulting modular regeneration simulation tool can efficiently determine the possible hovering locations and provide an estimate of the power regeneration potential for each hovering location, given the UAVs aerodynamic characteristics and wind-field conditions. Furthermore, a working regenerative drivetrain test setup was constructed and characterized that showcased promising conversion efficiencies and can be incorporated into existing UAVs easily.

@en

Increasing endurance is a major challenge for battery-powered aerial vehicles. A method is presented which makes use of an updraft around obstacles to decrease the power consumption of a fixed-wing unmanned aerial vehicle. A soaring flight controller has been developed that can autonomously soar while the unmanned aerial vehicle keeps its relative position to that of a moving object. Multiple simulations have been performed to analyse the limitations of the soaring controller under different conditions. The effect of a change in wind velocity and updraft has been analysed. The simulations showed that an increase in updraft decreases the energy consumption of the flight controller. An increase in wind velocity results in a higher updraft requirement, while a decrease in the wind velocity requires less updraft. The simulations achieved sustained flight at 0% throttle. The controller has been validated experimentally using the updraft generated by a moving ship. The practical, autonomous tests reduced the average throttle down to 4.5% in front of a ship. The method presented in this study achieved successful hovering flight using an energy control module for longitudinal positioning.

@en

Applications of Unmanned Aerial Vehicles (UAVs) are often limited by flight endurance. To address the limitation of endurance, we propose a regenerative soaring method in this paper. The atmospheric energy from updraft generated by obstacles such as hills and ships can be harvested by UAVs using a regenerative electric drivetrain. With fixed-wing aircraft, the vehicle can hover with specific wind condition, and the battery can be recharged in the air while wind hovering. In order to research the feasibility of this regenerative soaring method, we present a model to estimate hovering locations and the amount of extractable power using the proposed method. The resulting modular regeneration simulation tool can efficiently determine the possible hovering locations and provide an estimate of the power regeneration potential for each hovering location, given the UAVs aerodynamic characteristics and wind-field conditions. @en