Nanowires are ideal building blocks for next-generation solar cell applications. Nanowires grown with the selective area (SA) approach, in particular, have demonstrated very high material quality, thanks to high growth temperature, defect-free crystalline structure, and absence of external catalysts, especially in the InP material system. A comprehensive study on the influence of growth conditions and device processing on optical emission is still necessary though. This article presents an investigation of the nanowire optical properties, performed in order to optimize the internal radiative efficiency. In an initial preamble, the motivation for this study is discussed, as well as the morphology and crystallinity of the nanowires. The effect on the nanowire photoluminescence of several intrinsic and extrinsic parameters and factors are then presented in three sections: first, the influence of basic growth conditions such as the temperature and the precursor ratio is studied. Subsequently, the effects of varying dopant molar flows are explored, keeping in mind the intended solar cell application. Third, the manner in which the processing and the passivation affect the nanowire optical emission is discussed. Precise control of the growth conditions allows maximizing the nanowire internal radiative efficiency and thus their performance in solar cells and other optoelectronic devices.@en

The ability to trap or deflect sliding drops is of great interest in microfluidics, as it has several technological applications, ranging from self-cleaning and fog harvesting surfaces to laboratory-on-a-chip devices. We present a three-dimensional numerical model that describes sliding droplets interacting with wetting defects of variable strength and size. This approach provides relevant insight if compared to simplified analytic models, as it allows us to assess the relevance of the internal degrees of freedom of the droplet. We observe that the deformation of the drop enhances the effective strength and range of the defect, and we quantify this effect by comparison to a point-mass model. We also analyze the role of the steepness and strength of the defect on the drop motion, observing that small, strong defects are more effective at trapping than large, shallow traps of same excess surface energy. Finally, our results show quantitative agreement with previously reported electrowetting experiments, suggesting a universal behavior in droplet trapping that does not depend strongly on the nature of the defect. © 2015 American Physical Society.@en