M den Burger | TU Delft Repository

Md

M den Burger

Conference paper (8)

Doctoral thesis (1)

Journal article (2)

Report (6)

17 records found

1

Cutter production and kinematics of mixture forming

Conference paper (2010) - A.M. Talmon (author), WJ Vlasblom (author), WJ Vlasblom (author), M den Burger (author)

Design aspects for cutter heads related to the mixture forming process when cutting coarse materials

Journal article (2005) - M den Burger (author), WJ Vlasblom (author), WJ Vlasblom (author), A.M. Talmon (author)

Mixture forming processes in dredge cutter heads

Doctoral thesis (2003) - M den Burger (author)

Particle trajectories along a cutter head blade, using the results of a CFD model for the flow

Conference paper (2003) - M den Burger (author), A.M. Talmon (author)

Experimental and numerical investigation of cutter head dredging flows

Journal article (2003) - MA Dekker (author), NP Kruyt (author), M den Burger (author), WJ Vlasblom (author), WJ Vlasblom (author)

Invloed van de bladhoek op de menging van cutters

Report (2001) - M Lauret (author), M den Burger (author)

Mechanical transportation of particles induced by cutter blade geometry

Conference paper (2001) - M den Burger (author), A.M. Talmon (author)

Measurements of the flow generated by a cutter head

Conference paper (2001) - MA Dekker (author), WJ Vlasblom (author), WJ Vlasblom (author), M den Burger (author)

Influence of ladder inclination angle and particle size on cutterhead production

Conference paper (2001) - M den Burger (author), WJ Vlasblom (author), WJ Vlasblom (author), A.M. Talmon (author)

Het visualiseren van het stroombeeld in de snijkop met behulp van Matlab en aan de hand van gegevens berekend met COMPASS (vertrouwelijk)

Report (2000) - M Vredevoort (author), M den Burger (author), MA Dekker (author)

Het visualiseren van het debiet door een snijkop met behulp van MATLAB en aan de hand van gegevens berekend met COMPASS (vertrouwelijk)

Report (1999) - A Eskens (author), M den Burger (author)

Validation of a flow generated by a cutterhead

Conference paper (1999) - MA Dekker (author), LLJ Verdoodt (author), M den Burger (author)

Meting verblijftijden deeltjes in snijkop (vertrouwelijk)

Report (1999) - M den Burger (author)

Cutting tests in gravel blocks (vertrouwelijk)

Report (1999) - M den Burger (author)

Numerical simulation of the flow generated by cutter heads

Conference paper (1999) - PJ Steinbusch (author), WJ Vlasblom (author), WJ Vlasblom (author), M den Burger (author), NP Kruyt (author)

Influence of operational parameters on dredge cutterhead spillage

Conference paper (1999) - M den Burger (author), WJ Vlasblom (author), WJ Vlasblom (author), A.M. Talmon (author)

Metingen van stroomsnelheden rond een snijkop

Report (1998) - M den Burger (author), LLJ Verdoodt (author)