The Kingdom of Saudi Arabia (KSA) has vast geothermal energy resources. When developed, these markedly strengthen the country's goals of achieving a carbon-neutral economy. To demonstrate the feasibility and techno-economic performance of small-scale, hydrothermal well doublet systems for direct use in KSA, we perform reservoir and wellbore flow and heat-transport simulations as well as an economic analysis. The maximum permissible flowrate is constrained to avoid thermoelastic fracturing in the near-wellbore region. Reservoir conditions of a sedimentary basin along the Red Sea coast (near Al Wajh) provide an ideal study case to which we add economic parameters considered representative for KSA. We derive a Levelized Cost of Heat (LCOH) ranging from 49 to 128 $/MWh for 50-mD hydrothermal doublet systems with an optimal well spacing of 600 m and a flowrate ranging from 110 kg/s to 50 kg/s. LCOH is strongly influenced by decreasing reservoir transmissivity. Also, a minimum injection temperature is required to avoid thermoelastic fracturing. Our economic analysis further highlights that capacity factor and well-drilling cost have the greatest impact on LCOH. Thus, this study provides a guide and workflow to conduct techno-economic investigations for decision-making, risk mitigation, optimizing geothermal-energy-extraction and economic-performance conditions of hydrothermal doublet systems.

@en

The Kingdom of Saudi Arabia (KSA) has vast geothermal energy resources. When developed, these markedly strengthen the country's goals of achieving a carbon-neutral economy. To demonstrate the feasibility and techno-economic performance of small-scale, hydrothermal well doublet systems for direct use in KSA, we perform reservoir and wellbore flow and heat-transport simulations as well as an economic analysis. The maximum permissible flowrate is constrained to avoid thermoelastic fracturing in the near-wellbore region. Reservoir conditions of a sedimentary basin along the Red Sea coast (near Al Wajh) provide an ideal study case to which we add economic parameters considered representative for KSA. We derive a Levelized Cost of Heat (LCOH) ranging from 49 to 128 $/MWh for 50-mD hydrothermal doublet systems with an optimal well spacing of 600 m and a flowrate ranging from 110 kg/s to 50 kg/s. LCOH is strongly influenced by decreasing reservoir transmissivity. Also, a minimum injection temperature is required to avoid thermoelastic fracturing. Our economic analysis further highlights that capacity factor and well-drilling cost have the greatest impact on LCOH. Thus, this study provides a guide and workflow to conduct techno-economic investigations for decision-making, risk mitigation, optimizing geothermal-energy-extraction and economic-performance conditions of hydrothermal doublet systems.

@en

The primary goal of the present work is evaluation and comparison of vertical and horizontal well placements and their impact on the power output of a CPG (CO2 Plume Geothermal) system. Performances of vertical and horizontal wells arranged in a repeated five-spot pattern are evaluated for single- and multi-phase flow cases. Numerical models were developed in MOOSE (Multiphysics Object Oriented Simulation Environment), tested and compared against each other and previous studies. The study discusses the accuracy of present models, the effects of buoyancy, phase mobilities and different well placements on the power output of CPG systems.@en