Wind farm flow control aims at mitigating wake effects in order to maximize power production in wind farms. This work mostly focuses on the Helix strategy, which relies on individual pitch control to radially offset the application point of the thrust force from the rotor center and to dynamically change its azimuthal position. Previous studies have shown that power gains for a downstream turbine are higher for a counter-clockwise (CCW) rotation of the application point than for a clockwise (CW) one. In the CCW case, the wake develops as a right-handed helix, while in the CW case, a left-handed helix is observed. Using Large Eddy Simulations, this paper shows that the helix handedness in the wake matters due to its interaction with the wake swirl. Results of the CCW and CW helix first highlight the formation of streamwise vorticity in the near wake, which is transformed into strong coherent vortices in the far wake. Those vortex structures, to some extent similar to the counter-rotating vortex pair in the wake of yawed wind turbines, are responsible for (i) displacing the wake thanks to their induced velocities and (ii) deforming the shape of the wake.

In the context of wind turbine pitch control for load alleviation or active wake mixing, it is relevant to provide the time- and space-varying wind conditions as an input to the controller. Apart from classical wind measurement techniques, blade-load-based estimators can also be used to sense the incoming wind. These consider blades to be sensors of the flow and rely on having access to the operating parameters and measuring the blade loads. In this paper, we wish to verify how robust such estimators are to the control strategy active on the turbine, as it impacts both operating parameters and loads. We use an extended Kalman filter (EKF) to estimate the incoming wind conditions based on the blade bending moments. The internal model in the EKF relies on the blade element momentum (BEM) theory in which we propose accounting for delays between pitch action and blade loads by including dynamic effects. Using large-eddy simulations (LESs) to test the estimator, we show that accounting for the dynamic effects in the BEM formulation is needed to maintain the estimator accuracy when dynamic wake mixing control is active.