A massive MIMO network can serve ten's of users simultaneously. However, in dense scenarios the users are potentially closely-spaced, potentially resulting in substantial inter-user interference. Scheduling can overcome this by selecting the users that lead to the highest combined spectral efficiency. As scheduling comes with a significant pilot overhead, an alternative strategy could minimize user correlation by distributing the antenna elements in space. In this paper, we propose a comprehensive system study including antenna topology and distribution, user scheduling and pilot overhead reduction. Our user scheduling and pilot reduction algorithms are evaluated using system level simulations relying on indoor line-of-sight channel measurements from a 64 antenna base station at 2.61GHz. To have a thorough evaluation of the proposed algorithm, we consider four different antenna topologies, including co-located and distributed placement of the base station arrays. Our evaluation shows that in a conference room with 64 densely deployed users, our proposed low complexity algorithm can improve the spectral efficiency by at least 14% compared to random user selection with the best antenna distribution strategy. Finally, our results show that by relying on channel hardening, we reduce the pilot overhead by 3.2 \times.

One of the biggest problems in white light-emitting diodes (WLEDs) is the moisture-induced degradation of phosphors. This paper proposes a simple and feasible surface modification method to solve it, whereby a hydrophobic surface layer is developed on the surface of the phosphors. The particular case of orange-red-emitting Sr₂Si₅N₈:Eu²⁺ (SSN) phosphor was investigated. The mechanism to develop the hydrophobic layer involves hydrolysis and polymerization of tetraethylorthosilicate (TEOS) and polydimethylsiloxane (PDMS). The experimental results showed that the surface layer of SSN phosphor was successfully modified to a hydrophobic nanolayer (8 nm) of amorphous silicon dioxide that contains CH₃ groups in the surface. This hydrophobic surface layer gives the modified phosphor superior stability in high-pressure water steam conditions at 150°C.