The application of building information modeling (BIM) technology has effectively supported the high-quality development of building sustainability and informatization in China. However, few studies comprehensively analyzed the enacted policies, prevalent applications, and existing barriers of the latest application and development of BIM technology in building industry from building sustainability and informatization perspectives to provide effective consultation and guidelines for its rational scale application in China. This paper firstly made a statistical analysis on the policies and standards of BIM technology issued from 2011 to 2021 in China. Moreover, the latest application, development and existing issues of BIM technology in building sustainability and informatization were also comprehensively discussed and analyzed. The main conclusions indicated that the application status of BIM technology for building sustainability and informatization in China was large in quantity, wide in scope, but low in level. The existing issue and limitation in terms of BIM application in China was mainly due to the lack of standards and domestic-oriented tools. Finally, the future outlook and recommendations of BIM technology for building sustainability and informatization in China were also presented as avenues for upcoming research.

The use of natural ventilation in buildings to reduce the energy consumption and CO₂ emission has been widely investigated and practiced, but few existing studies have considered the exploration and assessment of natural ventilation in different location patterns of rural residential buildings in the mountainous terrain of China. In this paper, the representative rural residential buildings are firstly selected in Huarong, Pingjiang and Liuyang regions of northern Hunan Province to carry out on-site survey works to determine building types, physical parameters and layout forms. Then, the wind tunnel experiments are carried out to investigate the effectiveness of natural ventilation under different location patterns, and the monitored results are compared with simulated data. The results show that the experiments and simulations are in satisfactory agreement. The experimental data also indicate that when the modelled distance of 120 mm (i.e. 12 m between the building and hilly terrain in practical application) is the best option for building natural ventilation. Based on the investigation and statistical data, the natural ventilation effectiveness under different location patterns and operational conditions is simulated using CFD methods, and it is obtained the most favourable location pattern for natural ventilation. The results show that the winter ventilation of buildings in the existing location pattern is significantly obstructed in the hilly terrain, which is favourable to the indoor thermal environment, however, the natural ventilation is compromised to a certain extent in summer. Furthermore, the findings also show that, regardless of the hilly terrain's height at 50 m or 150 m, the buildings are able to avoid natural ventilation in winter to the maximum extent when the distance between the buildings and the frontier of the hilly terrain is double that of the building height (i.e. 12 m). This study could contribute to theoretical instructions for optimum design of natural ventilation of rural residential buildings in the mountainous terrain of central China.

Shallow subterranean ventilation of earth-to-air heat exchanger (EAHE) system can improve renewable utilisation, decrease CO ₂ emission and promote carbon-neutral transition. However, the conventional EAHE system has drawbacks, e.g., large occupied land area, low energy-usage efficiency, small falling gradient for buried pipe and fluctuated outlet air temperature. This study proposes a vertical EAHE integrated with annular PCM with advantages, including less occupied floor space, higher energy efficiency, better centralised discharge of air condensate water and more stable outlet air temperature. An experimental test-rig was established for online testing and the real-time monitored data was for modelling calibration to characterise the sophisticated heat transfer in phase change process. Afterwards, multivariant analysis on thermo-physical PCM parameters was conducted on cooling capacity and outlet air temperature fluctuation. A dimensionality reduction approach from redundant experiments was adopted for multivariant optimization and sensitivity analysis. Results show that PCM fusion temperature and latent heat of PCM dominate the cooling capacity with percentage contribution of 37.61% and 28.91%, respectively. PCM thickness and melting temperature dominate the temperature fluctuation with percentage contribution of 31.27% and 26.18%, respectively. This study provides benchmark and guidelines on PCM thermo-physical parameters’ selection with an efficient dimensionality reduction approach, paving path for application of the vertical EAHE integrated with PCMs in buildings.

Geothermal energy with abundance and large quantity can partially cover building heating/cooling loads and promote the carbon-neutrality transitions. Shallow geothermal ventilation (SGV) system, with a little initial investment cost, is one of promising technologies to partly replace the conventional air-conditioning system for air pre-cooling/pre-heating. This paper reviews applications of SGV system for improving thermal performance over latest two decades, which mainly includes the reclassification of SGV system, coupling with other advanced energy-saving technologies, application potentials for building cooling/heating under various weather conditions. Heat transfer mechanism and mathematical modelling techniques have been reviewed, together with in-depth analysis on current research trends, existing limitations, and recommendations of SGV system. Phase change materials, with considerable latent energy density, can stabilize the thermal performance with high reliability. The review identifies that optimization designs and advanced approaches need to be investigated to address the existing urgent issues of SGV system (e.g., large land occupation, difficulty in centralized collection of condensate water timely for horizontal buried pipe, bacteria growth, polluted supply air, and high construction cost for vertical buried pipe). A plenty of studies show that the SGV system could greatly expand the application scope and improve system energy efficiency by combining with other energy-saving technologies. This paper will provide some guidelines for the scientific researchers and engineers to keep track on recent advancements and research trends of SGV system for the building thermal performance enhancement and pave path for future research works.