Long-term variations in maximum gust speeds have been analyzed using wind measurements recorded at St Mary's, Isles of Scilly, UK, and possible drivers of recent changes have been investigated. A rigorous homogenization procedure has been applied to the wind records to remove discontinuities mainly caused by non-climatic changes. Trends in magnitude of the homogenized annual and monthly maximum gust speeds have been subsequently estimated. A significant (p < 0.10) decreasing trend of −0.102 m s⁻¹/10 years is exhibited by the annual maximum gust speeds over the period 1928–2011, while a non-significant (p > 0.10) positive trend characterizes the entire period 1928–2020 of wind measurements. A turning point has been detected in the monthly maximum gust speed series in 2012, followed by a trend reversal. Distinctive differences in the gust trend pattern have been observed among the seasons, with increasing trend in summer, and winter gust speeds exhibiting decline in 1969–2011 and strengthening since 2012. Variations in the monthly maximum gust speeds appear closely related to changes in air temperature and latitudinal pressure gradients. Furthermore, the monthly maximum gust speeds show significant correlation with the main oceanic-atmospheric circulation patterns in the North Atlantic region. A synergistic effect among the phases of the dominant patterns of climate variability appears to explain the observed decline and recovery trends in winter gusts. Summer gust speeds show a positive correlation with the global land-ocean temperature deviations from the corresponding 1951–1980 base period mean.

@en

Maintaining offshore steel structures is challenging and not environmentally friendly due to the frequent visits for inspection and repairs. Some offshore lighthouses are equipped with carbon steel helidecks fixed onto their lantern galleries in the 1970s to provide easy and safe access to maintenance staff and inspectors. Even though the helidecks supporting structures have maintained their integrity and are still functional in the offshore harsh environmental conditions, their inspection and maintenance remains a challenge due to the need of frequent visits which requires flying to the location of the lighthouse to bring the maintenance staff and equipment. We have developed a multidisciplinary computational framework to design new generation of aluminium helidecks for offshore lighthouses. We calculated the wind speed at the location of the Bishop Rock lighthouse based on the meteorological data, and the load distribution on the helideck due to such a wind condition, using computational fluid dynamic analysis. Then, we used the calculated wind load with other mechanical loads in the events of normal and emergency landings of a helicopter on this structure to find the best design configuration for this helideck. We generated a design space for different configurations of a beam structure and carried out, static, transient and buckling analysis to assess each case using finite element method. The selection criterion was set to find the structure with the minimum volume fraction and compliance while keeping the stress below the allowable stress. We found the structure with eight vertical and circumferential sections featuring two rows of diagonal bracing with one at the base and the other one at the third section from the base of the helideck was the optimum design for the considered loading in this work. This framework can be adopted for the design and optimisation of other offshore structures by other researchers and designers.

@en

The measurement of wave forces acting on marine structures is a complicated task, both during physical experiments and, even more so, in the field. Force transducers adopted in laboratory experiments require a minimum level of structural movement, thus violating the main assumption of fully rigid structure and introducing a dynamic response of the system. Sometimes the induced vibrations are so intense that they completely nullify the reliability of the experiments. On-site, it is even more complex, since there are no force transducers of the size and capacity able to measure such massive force intensity acting over the very large domain of a marine structure. To this end, this investigation proposes a Bayesian methodology aimed to remove the undesired effects from the directly (laboratory applications) or indirectly (field applications) measured wave forces. The paper presents three applications of the method: i) a theoretical application on a synthetic signal for which MATLAB® procedures are provided, ii) an experimental application on laboratory data collected during experiments aimed to model broken wave loading on a cylinder upon a shoal and iii) a field application designed to reconstruct the wave force that generated recorded vibrations on the Wolf Rock lighthouse during Hurricane Ophelia. The proposed methodology allows the inclusion of existing information on breaking and broken wave forces through the process-based informative prior distributions, while it also provides the formal framework for uncertainty quantification of the results through the posterior distribution. Notable findings are that the broken wave loading shows similar features for both laboratory and field data. The load time series is characterised by an initial impulsive component constituted by two peaks and followed by a delayed smoother one. The first two peaks are due to the initial impact of the aerated front and to the sudden deceleration of the falling water mass previously upward accelerated by the initial impact. The third, less intense peak, is due to the interaction between the cylinder and remaining water mass carried by the individual wave. Finally, the method allows to properly identify the length of the impulsive loading component. The implications of this length on the use of the impulse theory for the assessment or design of marine structures are discussed.

@en

The survivability analysis of offshore rock lighthouses requires several assumptions of the pressure distribution due to the breaking wave loading (Raby et al. (2019), Antonini et al. (2019). Due to the peculiar bathymetries and topographies of rock pinnacles, there is no dedicated formula to properly quantify the loads induced by the breaking waves on offshore rock lighthouses. Wienke’s formula (Wienke and Oumeraci (2005) was used in this study to estimate the loads, even though it was not derived for breaking waves on offshore rock lighthouses, but rather for the breaking wave loading on offshore monopiles. However, a thorough sensitivity analysis of the effects of the assumed pressure distribution has never been performed. In this paper, by means of the Wolf Rock lighthouse distinct element model, we quantified the influence of the pressure distributions on the dynamic response of the lighthouse structure. Different pressure distributions were tested, while keeping the initial wave impact area and pressure integrated force unchanged, in order to quantify the effect of different pressure distribution patterns. The pressure distributions considered in this paper showed subtle differences in the overall dynamic structure responses; however, pressure distribution #3, based on published experimental data such as Tanimoto et al. (1986) and Zhou et al. (1991) gave the largest displacements. This scenario has a triangular pressure distribution with a peak at the centroid of the impact area, which then linearly decreases to zero at the top and bottom boundaries of the impact area. The azimuthal horizontal distribution was adopted from Wienke and Oumeraci’s work (2005). The main findings of this study will be of interest not only for the assessment of rock lighthouses but also for all the cylindrical structures built on rock pinnacles or rocky coastlines (with steep foreshore slopes) and exposed to harsh breaking wave loading.@en

This study describes the structural response of historic lighthouses to extreme wave impacts. Located offshore on exposed rocks, 19th Century lighthouses were built with large interlocked granite blocks and have survived weathering for nearly two centuries. Under extreme wave impacts, lighthouses of this structural typology may uplift and rock, whereas sliding is prevented by the vertical interlocking. The uplift and sliding thresholds calculated with the limit analysis method reveal why this structural system is capable of bearing extreme wave impacts without failure. The ingenious vertical keying is proven to be a major characteristic that contributes to the resilience of these lighthouses. The structural response is explained with the use of analytic formulations of the rocking motion. Detailed analysis of the response to wave impact is conducted with reference to Wolf Rock lighthouse. The impact wave corresponding to a 250-year effective return period is identified using non-stationary Bayesian extreme analysis. Moreover, wave flume tests on a scaled cylindrical structure were performed to identify the wave impact force time-history shapes. Based on two waves: a theoretical time-history based on existing models in the literature and the measured time-histories from small-scale experiments, a series of synthetic force time-history sequences are generated for the purposes of a parametric analysis. This parametric analysis, with the Distinct Element Method, using the commercial software 3DEC, reveals the influence of the duration and shape of the force time-history function. For impacts with the same impulse values, shorter time impacts produce the most intense opening of joints, despite causing smaller horizontal displacements. Furthermore, variability in the structural response is revealed even for impacts of the same impulse, duration and maximum force but different shape of the force time-history.

@en

Lighthouses situated on exposed rocky outcrops warn mariners of the dangers that lurk beneath the waves. They were first constructed when approaches to wave loading and structural response were relatively unsophisticated, essentially learning from previous failures. Here, we chart the evolution of lighthouses on the Wolf Rock, situated between Land's End and the Isles of Scilly in the UK. The first empirical approaches are described, followed by design aspects of the present tower, informed by innovations developed on other rocky outcrops. We focus on a particular development associated with the automation of lighthouses: the helideck platform. The design concept is described and the structure then scrutinized for future survivability, using the latest structural modelling techniques of the entire lighthouse and helideck. Model validation data were obtained through a complex logistical field operation and experimental modal analysis. Extreme wave loading for the model required the identification of the 250-year return period wave using a Bayesian method with informative prior distributions, for two different scenarios (2017 and 2067). The structural models predict responses of the helideck to wave loading which is characterized by differential displacements of 0.093m (2017) and 0.115m (2067) with associated high tension forces and plastic strain.

@en

This theme issue, featuring Environmental loading of heritage structures, provides a snapshot of current civil engineering approaches to assessing ageing structures under a variety of loads. The publication arose from a serendipitous sequence of interactions. Academics at the University of Plymouth were contacted by Trinity House in 2010 to investigate reported vibrations in their rock lighthouses when impacted by storm waves. A pilot study on the nearby Eddystone lighthouse captured structural response data from the catastrophic storms of 2013/2014 and paved the way for a more comprehensive project. The STORMLAMP project brought together expertise across various civil engineering disciplines, hydrodynamics, field-based structural monitoring and structural modelling, at the University of Plymouth, University of Exeter and UCL, respectively. It has investigated rock lighthouses across all three of the General Lighthouse Authorities of UK and Ireland (Trinity House, Irish Lights and the Northern Lighthouse Board). Field modal testing was undertaken at seven rock lighthouses right across this region to support the characterization of extreme impulsive breaking wave loads, and the identified modal properties have subsequently been used to validate structural models. These models have also required the best estimates of likely wave loads in order to predict maximum structural responses, provided by researchers in the team.@en

Historic rock lighthouses are unusual structures that are situated in hostile marine environments to provide warning to mariners. Even in an era of satellite navigation their role continues to be an important one, but their survivability into the future is not assured. Out of concern for their ongoing service, the multidisciplinary STORMLAMP project is assessing their survivability under wave loading. This paper presents the various stages of investigations into the structural integrity and stability assessment of the Fastnet lighthouse, situated just off the coast of Ireland. The paper describes: Extreme Bayesian analysis to quantify waves of particular return periods resulting in a 1 in 250 year return period wave with H _0.1% of 17.6 m and an associated maximum force of 20,765 kN; logistically challenging field modal tests revealing the key modal parameters, like the modal masses of 1822 t and 1 675 t for 4.8 Hz and 5.0 Hz modes respectively, the cantilevered nature of the overall lighthouse and the directional effects due to the asymmetric contact with the granite rock; and details of a discontinuous finite element model that is used to determine the stability of the tower under the 1 in 250 year return period breaking wave condition, which is well within stability and material strength limits, causing maximum horizontal displacements in the order of 1 mm at the top of the tower. The overall assessment is that the sheer mass of the lighthouse and its interconnected joints are able to withstand the worst of the Atlantic storms.

@en

Despite use of GPS, lighthouses remain critical infrastructure for preserving safety of mariners and maritime trade, and the most dramatic examples are probably the Victorian era masonry towers located on remote offshore reefs around the British Isles and exposed to extreme weather conditions. Due to their age and likely increasing future loading, dynamic field investigations were undertaken for condition assessment. The field investigations of a sample of seven lighthouses had focused on experimental modal analysis (EMA) of shaker force and acceleration response data in order to identify sets of modal parameters (MPs) specifically including modal mass, which is useful for linking loading and response. However, the EMA missed significant useful information, which could be recovered from operational modal analysis (OMA) of additional ambient vibration data recorded during the field measurements, as well as from subsequent long-term monitoring of Wolf Rock lighthouse. Horizontal vibration modes of the towers appear as pairs of modes of similar shape and with close natural frequency due to the quasi-axisymmetric structural form(s), and the lowest frequency pairs are most important to identify since they contribute most to response to breaking wave impact loads. Reliably identifying both the close natural frequencies and the corresponding mode shape orientations was impossible with EMA. Bayesian OMA (BAYOMA) provided the most insight into the modal behaviour, while at the same time providing insight into the fundamental limitations for identifying close modes. Specific conclusions from the OMA described in this paper are: • Due to varying degree of asymmetry in the ‘concave elliptic frustum’ lighthouse shapes, mode frequencies in a pair were found to differ by between 0.75% and 3.8%. • Unlike EMA, OMA was able to identify (or estimate) the horizontal directions of the mode pairs corresponding to the very close natural frequencies. • Visually apparent structural symmetry may not be strongly linked to mode shape orientations. • Mode frequency variation over time may exceed -but is not accounted for in- the calculated identification uncertainty of MPs. • There is a trade-off between mode shape orientation uncertainty and closeness of frequencies in a close-mode pair.

@en

The INFRARISK project is developing reliable stress tests on European Critical Infrastructure using integrated tools for decision-support. This aims to achieve higher infrastructure network resilience to rare and low probability extreme events. As part of the project, a hazard assessment methodology is developed to account for extreme natural hazards with cascading effects. Often hazard scenarios arising from cascading effects lead to disastrous consequences because such hazards are not prepared for. In particular, this paper focuses on the cascading hazard scenario involving earthquake triggered landslides. Traditional risk analysis considers each risk source as independent from the others. As a consequence, values for risk are usually defined regardless of interactions among the multiple risks present in a region. The current approach accounts for interaction between the two hazards in such a way that the probabilities of occurrence can be aggregated as part of an overall risk assessment methodology. The methodology is then demonstrated on a virtual road network case study as a proof of concept.@en