A microfluidic protein aggregation device (microPAD) that allows the user to perform a series of protein incubations with various concentrations of two reagents is demonstrated. The microfluidic device consists of 64 incubation chambers to perform individual incubations of the protein at 64 specific conditions. Parallel processes of metering reagents, stepwise concentration gradient generation, and mixing are achieved simultaneously by pneumatic valves. Fibrillation of bovine insulin was selected to test the device. The effect of insulin and sodium chloride (NaCl) concentration on the formation of fibrillar structures was studied by observing the growth rate of partially folded protein, using the fluorescent marker Thioflavin-T. Moreover, dual gradients of different NaCl and hydrochloric acid (HCl) concentrations were formed, to investigate their interactive roles in the formation of insulin fibrils and spherulites. The chip-system provides a bird’s eye view on protein aggregation, including an overview of the factors that affect the process and their interactions. This microfluidic platform is potentially useful for rapid analysis of the fibrillation of proteins associated with many misfolding-based diseases, such as quantitative and qualitative studies on amyloid growth.

@en

A microfluidic device for pH gradient chromatofocusing is presented, which performs creation of a micro-column, pH gradient generation, and fraction collection in a single device. Using a sieve micro-valve, anion exchange particles were packed into a microchannel in order to realize a solid-phase absorption column. To fractionate proteins according to their isoelectric points, elution buffer solutions with a stepwise pH gradient were prepared in 16 parallel mixing reactors and flowed through the micro-column, wherein a protein mixture was previously loaded. The volume of the column is only 20 nL, hence it allows extremely low sample consumption and fast analysis compared with a conventional system. We demonstrated separation of two proteins, albumin–fluorescein isothiocyanate conjugate (FITC-BSA) and R-Phycoerythrin (R-PE), by using a microcolumn of commercial charged polymeric particles (Source 15Q). The microfluidic device can be used as a rapid diagnostic tool to analyse crude mixtures of proteins or nucleic acids and determine adsorption/desorption characteristics of various biochemical products, which can be helpful for scientific fundamental understanding as well as instrumental in various industrial applications, especially in early stage screening and process development.

@en

A microfluidic platform or "microfluidic batch adsorption device" is presented, which performs two sets of 9 parallel protein incubations with/without adsorbent particles to achieve an adsorption isotherm of a protein in a single experiment. The stepwise concentration gradient of a target protein was created by the integration of microvalves into the device. The nanoliter-scale reactor (41 nl) allows about 5000 times reduction of sample consumption and fast analysis compared with a conventional 96 well plate. The integration of two sets of parallel reactors as reference reactors and adsorption reactors, respectively, in a single microfluidic format has many advantages, such as the exclusion of the influence of undesired experimental fluctuations, and the possibility of real-time tracing of adsorption processes. We performed batch adsorption of albumin-fluorescein isothiocyanate conjugate (FITC-BSA) on polymeric particles (Source 15Q) to obtain an adsorption isotherm. The obtained on-chip parameters maximum adsorption amount (Q_max) and adsorption constant (K_eq) were 0.33 ± 0.03 ng per particle and 0.97 ± 0.22 L g^-1, respectively, which are in good agreement with off-chip values (Q_max = 0.34 ± 0.01 ng per particle and K_eq = 0.81 ± 0.10 L g^-1). On-chip adsorption isotherms of FITC-BSA at various concentrations of sodium chloride (NaCl) were measured to evaluate the effect of this salt on the adsorption capability of Source 15Q. The microfluidic device serves as a new analytical tool, useful in biotechnological and industrial applications, where the adsorption behavior of (bio)molecules on commercial adsorbent particles plays critical roles, such as protein separation and purification, detection of analytes and biomarkers, and solid-phase immunoassays.

@en

A microfluidic platform or "microfluidic mapper" is demonstrated, which in a single experiment performs 36 parallel biochemical reactions with 36 different combinations of two reagents in stepwise concentration gradients. The volume used in each individual reaction was 36 nl. With the microfluidic mapper, we obtained a 3D enzyme reaction plot of horseradish peroxidase (HRP) with Amplex Red (AR) and hydrogen peroxide (H2O2), for concentration ranges of 11.7 μM to 100.0 μM and 11.1 μM to 66.7 μM for AR and H2O2, respectively. This system and methodology could be used as a fast analytical tool to evaluate various chemical and biochemical reactions especially where two or more reagents interact with each other. The generation of dual concentration gradients in the present format has many advantages such as parallelization of reactions in a nanoliter-scale volume and the real-time monitoring of processes leading to quick concentration gradients. The microfluidic mapper could be applied to various problems in analytical chemistry such as revealing of binding kinetics, and optimization of reaction kinetics.

@en

We present a novel microfluidic system for the pH-gradient focusing of proteins with the integration of 16 parallel micro-mixers, a micro-column, and a multiplexer. In this work we successfully achieved the creation of 16 non-linear gradients and the generation of a solid-phase micro-column for the realization of anion exchange chromatography on a single chip. With the device we demonstrated the separation of a protein mixture of R-phycoerythrin and FITC-BSA based on pH-gradient chromatofocusing.@en