Achieving convenient and accurate detection of indoor ppb-level formaldehyde is an urgent requirement to ensure a healthy working and living environment for people. Herein, ultrasmall In₂O₃ nanorods and supramolecularly functionalized reduced graphene oxide are selected as hybrid components of visible-light-driven (VLD) heterojunctions to fabricate ppb-level formaldehyde (HCHO) gas sensors (named InAG sensors). Under 405 nm visible light illumination, the sensor exhibits an outstanding response toward ppb-level HCHO at room temperature, including the ultralow practical limit of detection (pLOD) of 5 ppb, high response (R_a/R_g = 2.4, 500 ppb), relatively short response/recovery time (119 s/179 s, 500 ppb), high selectivity, and long-term stability. The ultrasensitive room temperature HCHO-sensing property is derived from visible-light-driven and large-area heterojunctions between ultrasmall In₂O₃ nanorods and supramolecularly functionalized graphene nanosheets. The performance of the actual detection toward HCHO is evaluated in a 3 m³ test chamber, confirming the practicability and reliability of the InAG sensor. This work provides an effective strategy for the development of low-power-consumption ppb-level gas sensors.

Constructing near-infrared light (NIR) light-enhanced room temperature gas sensors is becoming more promising for practical application. In this study, learning from the structure and photosynthetic process of chlorophyll thylakoid membranes in plants, the first “Thylakoid membrane” structural formaldehyde (HCHO) sensor is constructed by matching the upconversion emission of the lanthanide-doped upconversion nanoparticles (UCNPs) and the UV–vis adsorption of the as-prepared nanocomposites. The NIR-mediated sensor exhibits excellent performances, including ultra-high response (R_a / R_g = 2.22, 1 ppm), low practical limit of detection (50 ppb), reliable repeatability, high selectivity, and broadband spectral response. The practicality of the NIR-mediated gas sensor is confirmed through the remote and external stimulation test. A study of sensing mechanism demonstrates that it is the UCNPs-based light transducer produces more light-induced oxygen species for gas response in the process of non-radiative/radiative energy transfer, playing a key role in significantly improving the sensing properties of the sensor. The universality of NIR-mediated gas sensors based on UCNPs is verified using ZnO, In₂O_3, and SnO₂ systems. This work paves a way for fabricating high-performance NIR-mediated gas sensors and will expand the application fields of NIR light.

Transition metal dichalcogenides (TMDCs) garner significant attention for their potential to create high-performance gas sensors. Despite their favorable properties such as tunable bandgap, high carrier mobility, and large surface-to-volume ratio, the performance of TMDCs devices is compromised by sulfur vacancies, which reduce carrier mobility. To mitigate this issue, we propose a simple and universal approach for patching sulfur vacancies, wherein thiol groups are inserted to repair sulfur vacancies. The sulfur vacancy patching (SVP) approach is applied to fabricate a MoS₂-based gas sensor using mechanical exfoliation and all-dry transfer methods, and the resulting 4-nitrothiophenol (4NTP) repaired molybdenum disulfide (4NTP-MoS₂) is prepared via a sample solution process. Our results show that 4NTP-MoS₂ exhibits higher response (increased by 200 %) to ppb-level NO₂ with shorter response/recovery times (61/82 s) and better selectivity at 25 °C compared to pristine MoS₂. Notably, the limit of detection (LOD) toward NO₂ of 4NTP-MoS₂ is 10 ppb. Kelvin probe force microscopy (KPFM) and density functional theory (DFT) reveal that the improved gas sensing performance is mainly attributed to the 4NTP-induced n-doping effect on MoS₂ and the corresponding increment of surface absorption energy to NO₂. Additionally, our 4NTP-induced SVP approach is universal for enhancing gas sensing properties of other TMDCs, such as MoSe₂, WS₂, and WSe₂.

To develop multifunctional small-molecule prodrugs is highly desirable for cancer treatment but remains challenging in intrinsic traceability. As an acid-cleavable linkage, a Schiff bases benefiting from its distinctive fluorescence quenching ability was selected to prepare a small-molecule prodrug with cancer-targeted and self-indicating. In this study, we designed and developed a multifunctional self-assembled nanobomb of amphiphilic TPE-Lenalidomide prodrug, which comprises a hydrophobic aggregation-induced emission (AIE) probe 4-(1,2,2-triphenylvinyl)benzaldehyde (TPE-CHO) and a hydrophilic anticancer drug Lenalidomide via a Schiff base linkage. We investigated the synergistic effect of d-PET and C═N isomerization which would keep the fluorescence of TPE-Lenalidomide in the “always off” state by density functional theory (DFT) calculation. Once reaching the pathological site, such a vesicular nanobomb of TPE-Lenalidomide will be acidolyzed to release the AIE probe and Lenalidomide molecules simultaneously, consequently realizing high-efficiency effects of tumor imaging and cancer therapy (cell viability: normal cell L929, ∼79.49%; cancer cell 4T1, ∼27.08%; p = 0.000118). This work may pave an avenue to prepare small-molecule prodrugs for tumor-targeted diagnosis and cancer therapy.

Inspired by the CO₂-induced reversible activation mechanism of the slow anion channel 1 (SLAC1) in plant stomatal guard cells during plant photosynthesis, we designed and prepared a CO₂- switchable H⁺/OH⁻ ion channel (CSPH ion channel). A high-performance chemiresistive room temperature CO₂ sensor has been prepared based on this CSPH ion channel. The obtained CO₂ room temperature sensor γ-CD-MOF@RhB exhibits high sensitivity (R_g/R₀ = 1.50, 100 ppm), excellent selectivity, good stability (less than 5% reduction in 30 days response value), and 99.96% consistency with commercial infrared CO₂ meter. The practical limit of detection (pLOD) of the γ-CD-MOF@RhB sensor reaches 10 ppm at room temperature toward CO₂, which is the lowest for reported MOF-derived chemiresistive room temperature CO₂ sensors so far. Ion conduction mechanism studies have shown that the CSPH ion channel behaves as a CO₂-switchable H⁺/OH⁻ ion channel with a switching point of approximately 60 000 ppm CO₂. As an application attempt, the fabricated low pLOD CO₂ sensor has been used for human exhaled CO₂ detection to compare CO₂ concentration in the breath of individuals before and after exercise and COVID-19. It was also logically indicated that the average concentration of human exhaled CO₂ after COVID-19 recovery is different for undiseased subjects.

Fluorescent patterns with multiple functions enable high-security anti-counterfeiting labels. Complex material synthesis and patterning processes limit the application of multifunctional fluorescent patterns, so the technology of in situ fluorescent patterning with tunable multimodal capabilities is becoming more necessary. In this work, an in situ fluorescent patterning technology was developed using laser direct writing on solid cellulose film at ambient conditions without masks. The fluorescent intensity and surface microstructure of the patterns could be adjusted by programmable varying of the laser parameters simultaneously. During laser direct writing, carbon dots are generated in situ in a cellulose ester polymer matrix, which significantly simplifies the fluorescent patterning process and reduces the manufacturing cost. Interestingly, the tunable fluorescent intensity empowers the fabrication of visual stereoscopic fluorescent patterns with excitation dependence, further improving its anti-counterfeiting performance. The obtained fluorescent patterns still show ultrahigh optical properties after being immersed in an acid/base solution (pH 5-12) over one month. In addition, the anti-UV performance of the obtained laser-patterned film with transmittance around 90% is comparable to that of commercial UV-resistant films. This work provided an advanced and feasible approach to fabricating programmable, performance-tunable, subtle fluorescent patterns in large-scale for industrial application.

Implementing parts per billion-level nitric oxide (NO) sensing at room temperature (RT) is still in extreme demand for monitoring inflammatory respiratory diseases. Herein, we have prepared a kind of core-shell structural Hemin-based nanospheres (Abbr.: Hemin-nanospheres, defined as HNSs) with the core of amorphous Hemin and the shell of acetone-derived carbonized polymer, whose core-shell structure was verified by XPS with argon-ion etching. Then, the HNS-assembled reduced graphene oxide composite (defined as HNS-rGO) was prepared for RT NO sensing. The acetone-derived carbonized polymer shell not only assists the formation of amorphous Hemin core by disrupting their crystallization to release more Fe-N4 active sites, but provides protection to the core. Owing to the unique core-shell structure, the obtained HNS-rGO based sensor exhibited superior RT gas sensing properties toward NO, including a relatively higher response (Ra/Rg = 5.8, 20 ppm), a lower practical limit of detection (100 ppb), relatively reliable repeatability (over 6 cycles), excellent selectivity, and much higher long-term stability (less than a 5% decrease over 120 days). The sensing mechanism has also been proposed based on charge transfer theory. The superior gas sensing properties of HNS-rGO are ascribed to the more Fe-N4 active sites available under the amorphous state of the Hemin core and to the physical protection by the shell of acetone-derived carbonized polymer. This work presents a facile strategy of constructing a high-performance carbon-based core-shell nanostructure for gas sensing.