Mechanistic models mostly focus on the target protein and some selected process- or product-related impurities. For a better process understanding, however, it is advantageous to describe also reoccurring host cell protein impurities. Within the purification of biopharmaceuticals, the binding of host cell proteins to a chromatographic resin is far from being described comprehensively. For a broader coverage of the binding characteristics, large-scale proteomic data and systems level knowledge on protein interactions are key. However, a method for determining binding parameters of the entire host cell proteome to selected chromatography resins is still lacking. In this work, we have developed a method to determine binding parameters of all detected individual host cell proteins in an Escherichia coli harvest sample from large-scale proteomics experiments. The developed method was demonstrated to model abundant and problematic proteins, which are crucial impurities to be removed. For these 15 proteins covering varying concentration ranges, the model predicts the independently measured retention time during the validation gradient well. Finally, we optimized the anion exchange chromatography capture step in silico using the determined isotherm parameters of the persistent host cell protein contaminants. From these results, strategies can be developed to separate abundant and problematic impurities from the target antigen.@en

The challenging task of designing biopharmaceutical downstream processes is initially to select the type of unit operations, followed by optimizing their operating conditions. For complex flowsheet optimizations, the strategy becomes crucial in terms of duration and outcome. In this study, we compared three optimization strategies, namely, simultaneous, top-to-bottom, and superstructure decomposition. Moreover, all strategies were evaluated by either using chromatographic Mechanistic Models (MMs) or Artificial Neural Networks (ANNs). An overall evaluation of 39 flowsheets was performed, including a buffer-exchange step between the chromatography operations. All strategies identified orthogonal structures to be optimal, and the weighted overall performance values were generally consistent between the MMs and ANNs. In terms of time-efficiency, the decomposition method with MMs stands out when utilizing multiple cores on a multiprocessing system for simulations. This study analyses the influence of different optimization strategies on flowsheet optimization and advices on suitable strategies and modeling techniques for specific scenarios.@en

Purification of recombinantly produced biopharmaceuticals involves removal of host cell material, such as host cell proteins (HCPs). For lysates of the common expression host Escherichia coli (E. coli) over 1500 unique proteins can be identified. Currently, understanding the behavior of individual HCPs for purification operations, such as preparative chromatography, is limited. Therefore, we aim to elucidate the elution behavior of individual HCPs from E. coli strain BLR(DE3) during chromatography. Understanding this complex mixture and knowing the chromatographic behavior of each individual HCP improves the ability for rational purification process design. Specifically, linear gradient experiments were performed using ion exchange (IEX) and hydrophobic interaction chromatography, coupled with mass spectrometry-based proteomics to map the retention of individual HCPs. We combined knowledge of protein location, function, and interaction available in literature to identify trends in elution behavior. Additionally, quantitative structure–property relationship models were trained relating the protein 3D structure to elution behavior during IEX. For the complete data set a model with a cross-validated R2 of 0.55 was constructed, that could be improved to a R2 of 0.70 by considering only monomeric proteins. Ultimately this study is a significant step toward greater process understanding.@en

Protein-based biopharmaceuticals require high purity before final formulation to ensure product safety, making process development time consuming. Implementation of computational approaches at the initial stages of process development offers a significant reduction in development efforts. By preselecting process conditions, experimental screening can be limited to only a subset. One such computational selection approach is the application of Quantitative Structure Property Relationship (QSPR) models that describe the properties exploited during purification. This work presents a novel open-source Python tool capable of extracting a range of features from protein 3D models on a local computer allowing total transparency of the calculations. As open-source tool, it also impacts initial investments in constructing a QSPR workflow for protein property prediction for third parties, making it widely applicable within the field of bioprocess development. The focus of current calculated molecular features is projection onto the protein surface by constructing surface grid representations. Linear regression models were trained with the calculated features to predict chromatographic retention times/volumes. Model validation shows a high accuracy for anion and cation exchange chromatography data (cross-validated R² of 0.87 and 0.95). Hence, these models demonstrate the potential of the use of QSPR to accelerate process design.

@en

Optimizing a biopharmaceutical chromatographic purification process is currently the greatest challenge during process development. A lack of process understanding calls for extensive experimental efforts in pursuit of an optimal process. In silico techniques, such as mechanistic or data driven modeling, enhance the understanding, allowing more cost-effective and time efficient process optimization. This work presents a modeling strategy integrating quantitative structure property relationship (QSPR) models and chromatographic mechanistic models (MM) to optimize a cation exchange (CEX) capture step, limiting experiments. In QSPR, structural characteristics obtained from the protein structure are used to describe physicochemical behavior. This QSPR information can be applied in MM to predict the chromatogram and optimize the entire process. To validate this approach, retention profiles of six proteins were determined experimentally from mixtures, at different pH (3.5, 4.3, 5.0, and 7.0). Four proteins at different pH's were used to train QSPR models predicting the retention volumes and characteristic charge, subsequently the equilibrium constant was determined. For an unseen protein knowing only the protein structure, the retention peak difference between the modeled and experimental peaks was 0.2% relative to the gradient length (60 column volume). Next, the CEX capture step was optimized, demonstrating a consistent result in both the experimental and QSPR-based methods. The impact of model parameter confidence on the final optimization revealed two viable process conditions, one of which is similar to the optimization achieved using experimentally obtained parameters. The multiscale modeling approach reduces the required experimental effort by identification of initial process conditions, which can be optimized.@en

An optimal purification process for biopharmaceutical products is important to meet strict safety regulations, and for economic benefits. To find the global optimum, it is desirable to screen the overall design space. Advanced model-based approaches enable to screen a broad range of the design-space, in contrast to traditional statistical or heuristic-based approaches. Though, chromatographic mechanistic modeling (MM), one of the advanced model-based approaches, can be speed-limiting for flowsheet optimization, which evaluates every purification possibility (e.g., type and order of purification techniques, and their operating conditions). Therefore, we propose to use artificial neural networks (ANNs) during global optimization to select the most optimal flowsheets. So, the number of flowsheets for final local optimization is reduced and consequently the overall optimization time. Employing ANNs during global optimization proved to reduce the number of flowsheets from 15 to only 3. From these three, one flowsheet was optimized locally and similar final results were found when using the global outcome of either the ANN or MM as starting condition. Moreover, the overall flowsheet optimization time was reduced by 50% when using ANNs during global optimization. This approach accelerates the early purification process design; moreover, it is generic, flexible, and regardless of sample material's type.

@en

Mass-spectrometry-based proteomics is increasingly employed to monitor purification processes or to detect critical host cell proteins in the final drug substance. This approach is inherently unbiased and can be used to identify individual host cell proteins without prior knowledge. In process development for the purification of new biopharmaceuticals, such as protein subunit vaccines, a broader knowledge of the host cell proteome could promote a more rational process design. Proteomics can establish qualitative and quantitative information on the complete host cell proteome before purification (i.e., protein abundances and physicochemical properties). Such information allows for a more rational design of the purification strategy and accelerates purification process development. In this study, we present an extensive proteomic characterisation of two E. coli host cell strains widely employed in academia and industry to produce therapeutic proteins, BLR and HMS174. The established database contains the observed abundance of each identified protein, information relating to their hydrophobicity, the isoelectric point, molecular weight, and toxicity. These physicochemical properties were plotted on proteome property maps to showcase the selection of suitable purification strategies. Furthermore, sequence alignment allowed integration of subunit information and occurrences of post-translational modifications from the well-studied E. coli K12 strain.

@en

The safety requirements for vaccines are extremely high since they are administered to healthy people. For that reason, vaccine development is time-consuming and very expensive. Reducing time-to-market is key for pharmaceutical companies, saving lives and money. Therefore the need is raised for systematic, general and efficient process development strategies to shorten development times and enhance process understanding. High throughput technologies tremendously increased the volume of process-related data available and, combined with statistical and mechanistic modeling, new high throughput process development (HTPD) approaches evolved. The introduction of model-based HTPD enabled faster and broader screening of conditions, and furthermore increased knowledge. Model-based HTPD has particularly been important for chromatography, which is a crucial separation technique to attain high purities. This review provides an overview of downstream process development strategies and tools used within the (bio)pharmaceutical industry, focusing attention on (protein subunit) vaccine purification processes. Subsequently high throughput process development and other combinatorial approaches are discussed and compared according to their experimental effort and understanding. Within a growing sea of information, novel modeling tools and artificial intelligence (AI) gain importance for finding patterns behind the data and thereby acquiring a deeper process understanding.

@en