In this paper, the authors attempt to clarify the relationship between spatial configuration, building microclimate and thermal comfort through the investigation of a modern house in hot and humid climate with spatial diversity. Firstly, the spatial configuration of the house was analysed in detail. The spatial geometric features, spatial boundary conditions, and human activities in the building were categorised. Secondly, field measurements were conducted to investigate the microclimate of the house. The air temperature, relative humidity and wind velocity were monitored on typical summer days. Thirdly, a dynamic thermal simulation was performed to predict the thermal comfort performance of the building over the period of an entire summer. The simulated results were compared with the measurements, and the adaptive thermal comfort approach was used to evaluate the thermal comfort. The modern house studied was found to have a varied spatial configuration, similar to local vernacular buildings, which produces diverse thermal environments in the building. The microclimate of this specific building could provide considerable thermal comfort for the occupants in summer under the local climate conditions, although thermal comfort cannot be achieved through free-running model in the hottest days, mechanical cooling or mixed model are needed.

@en

Passive cooling for thermal comfort in summer is a big issue in low-energy building design. An important reason is global warming because global warming increases the number of cooling degree days. In addition, the energy demand of buildings has increased rapidly due to both the improvement of living standards and the globalisation of modern architecture. And finally, cooling a building is especially a challenge in countries where few resources are available. Passive cooling techniques, where solar and heating control systems are applied, largely depend on the design of the urban morphology and the building shape. The first research question is therefore: What is the relationship between spatial configuration, thermal environment and thermal summer comfort of occupants and how to apply spatial configuration as the passive cooling strategy in architectural design? Space is the empty part of a building, but its volume is important for the activities of occupants. Architects define the general spatial structure of a building mainly in the early design stages. There they define the spatial properties of a building, i.e. how the spaces are connected and what are the boundary conditions between the spaces. The final research question of this research therefore is: What is the relationship between spatial configuration, thermal environment and thermal summer comfort and how to apply spatial configuration as passive cooling strategy in architectural design in the early stages? In order to answer this research question, this dissertation is divided into two main parts. @en

In the early design stages, architects are in constant search of a design direction that can determine the success or failure of the final design. However, in real design practice, most of the prediction methods for building performances, in this paper energy and thermal comfort, are utilised in the later design stages. Spatial configuration is one of the most important issues for architectural design in the early design stage. This study investigates the correlations between the spatial indicators connected with architectural design and the building physics indicators ventilation performance and energy performance. The main objective is to explore the potential of applying spatial indicators using space syntax to predict ventilation performance and energy performance in order to support architects for the evaluation of their concepts and schemes in early design stages. The layout of a high-rise apartment in China in five different cities is chosen as a case study. The results show that the selected three indicators: connectivity value, air change rate and annual cooling saving ratio are linearly correlated, not just at building level but also at room level. R2, the correlation coefficient of determination, is between 0.53 and 0.90 (except for the case of Chongqing at building level).@en

The authors wanted to prove that there is a large correlation between the concepts spatial openness and comfort (visual, wind speed and thermal) perception in people’s minds in a hot and humid climate in summer in order to be able to use spatial configuration parameters such as openness, connectivity and depth as a design tool for a comfortable an energy efficient building in the early design stages. 513 local Chinese college architecture students in 2015 were questioned about the relationship between spatial openness and comfort perception. The main findings for a hot and humid climate are: a. spatial openness of a particular space significantly effects occupants’ visual perception, wind speed perception and thermal perception in a particular space (p < .05). b. There is a strong effect size between spatial openness and visual and wind perception (w = .50 and .54); the effect size of the thermal perception is weaker (w = .14). c. The comfort perception is strongly influenced by the time of day, therefore visual perception, wind perception and thermal perception can influence occupant movement between different spaces as is the advice of the adaptive thermal comfort.@en

Space syntax is a well-known technique for the quantitative analysis of spatial relationships and social patterns in buildings and urban systems. On the other hand, in building thermal performance research field, adaptive comfort theory is based on the concept that thermal comfort is highly influenced by personal preference and contextual factors that are commonly found in naturally ventilated buildings. In this paper, the authors try to find the relationship between spatial configuration and summer thermal comfort and the potential to use space syntax approach to predict the effect of spatial configuration for thermal comfort. In detail, the relationship between spatial configuration, air movement and occupants’ activity were investigated. As a case study, a free-running house with diverse spaces, which lies in the hot and humid climate area, was analysed by space syntax approach. The results were compared with the measured wind velocity and CFD simulation. It is found that the spaces which have high “connectivity values” and “integration values” in space syntax analysis can provide more natural ventilation which is important to increase the thermal comfort sensation in hot and humid weather condition without using active cooling. Therefore, occupants prefer to move to these spaces. This result shows that there is a potential in applying the space syntax approach on the building spatial configuration in predicting the air movement and occupants’ movement. It is possible to improve building thermal performance in the architectural early design stages through spatial configuration.@en