The invention of hydroelectric nanogenerators (HENGs) is a breakthrough technology for green electricity generation. However, the underlying mechanisms driving energy conversion remain largely unknown, impeding the development of HENGs with high energy densities. Here, we develop a new Multiphysics model involving Darcy's law, phase transfer in porous media, and current modules to reveal the mechanisms of electricity generation in HENGs. This is the first model to simulate evaporation as a streaming potential variable with the Robin-type boundary condition that overcomes the shortcomings of Neumann- and Dirichlet-type boundary conditions. Including the streaming potential and electric double layer (EDL) effects, the simulation can be based on actual water flow conditions, which is more convincing and lays a microscopic foundation for future research and exploration into the mechanism of hydroelectric electricity generation. The new model reveals that the concentrations of salt solutions significantly impact the output power density of HENGs by affecting the solution conductivity in the stern layer, while relative humidity has a minimal impact. This model along with experimental validation offers a robust method to improve the electrical output of HENGs.@en

Hydroelectric nanogenerators (HENGs) are emerging devices towards sustainable and green energy production. The voltage produced by HENGs varies depending on several variables including the device size and architecture, the type of material used and the ambient conditions. Currently, HENGs have demonstrated the ability to generate voltage up to a few volts, making them well-suited for operating low-power electronics. This work gives a comprehensive review on the various aspects, including the working mechanisms of HENGs based on the phase transitions of water, different working modes (continuous or intermittent), and the materials used/developed to date. Factors that influence the device performance and durability/lifespan are analyzed and the potential applications of HENGs are recommended. Finally, the existing challenges and future trends of HENGs are discussed to guide the development of high-performance HENGs that can help meet the increasing electricity need for charging portable electronics. This review helps identify avenues for enhancing the efficiency and efficacy of HENGs by materials optimization and device design.

@en

Mixing, homogenization, separation, and filtration are crucial processes in miniaturized analytical systems employed for in-vitro biological, environmental, and food analysis. However, in microfluidic systems achieving homogenization becomes more challenging due to the laminar flow conditions, which lack the turbulent flows typically used for mixing in traditional analytical systems. Here, we introduce an acoustofluidic platform that leverages an acoustic transducer to generate microvortex streaming, enabling effective homogenizing of food samples. To reduce reliance on external equipment, tubing, and pump, which is desirable for Point-of-Need testing, our pumpless platform employs a hydrophilic yarn capable of continuous wicking for sample perfusion. Following the homogenization process, the platform incorporates an array of micropillars for filtering out large particles from the samples. Additionally, the porous structure of the yarn provides a secondary screening mechanism. The resulting system is compact, and reliable, and was successfully applied to the detection of Escherichia coli (E. coli) in two different types of berries using quantitative polymerase chain reaction (qPCR). The platform demonstrated a detection limit of 5 CFU g ⁻¹, showcasing its effectiveness in rapid and sensitive pathogen detection.

@en

The ubiquitous and continuous natural processes of water absorption and evaporation have stimulated interest in generating electricity through the creation of a flow of electrical charge, which can then be collected and stored. However, the resultant low output power density as well as the complicated fabrication and operation processes have hindered the practical applications of this technology. Herein, we demonstrate a highly efficient self-operating hydroelectric nanogenerator (HENG) that produces electricity through the absorption and evaporation of seawater. The single HENG consists of a hydrophilic wool cloth stripe functionalized with ketjen black powders and equipped with two electrodes affixed at its ends. The continuous absorption and evaporation of seawater results in the generation of electricity that can be stored in a capacitor. A series of 16 HENGs, each consisting of 10 stacked wool cloth stripes, can generate sufficient power to charge a supercapacitor to 1.6 V within 5 h 30 min under ambient conditions, outperforming most comparable devices reported. The superior performance observed for the HENG is attributable to the hydrophilicity and porosity of wool cloth which can continuously absorb seawater at a desired rate as well as the 2D structure of ketjen black and its high conductivity. This work paves the way to facilitate the development of HENGs for practical applications.

@en