In this study, we describe a method for measuring the spectral reflectance of a paint layer at both the surface and in the volume of the paint layers. We first present a fringes model which illustrates the possibilities for spectral reconstruction using a Short-Time-Fourier-Transform algorithm. We investigate the remaing percentage errors and identified that there is a strong fluctuation along the wavelength range of the spectrometer. Then, we demonstrate the validity of our approach experimentally by measuring the spectral reflectance of a paint layer using a custom-made visible light optical coherence tomography system. There, we reconstruct the spectral reflectance of a paint layer by probing the surface and a depth range below the surface. Finally, we show the importance to include a wavelength sensitive correction in the reconstruction for taking into account the spectral shape of the light in the reference path of the interferometer. This work is part of the Down To The Ground project, in which the results of the OCT inspection will be used directly by a consortium of technical art historians and conservators.

@en

In this study, we compare the hyperspectral imaging capabilities of a custom-built visible light OCT with those of a commercial grade hyperspectral camera. Using the Short-Time-Fourier-Transform algorithm on the OCT signal, we estimate the variation in the surface spectral response from two paint pigments. Our study aims at comparing the spectral measurements obtained from calibration samples and to estimate an optimal working point for OCT-based hyperspectral processing.

@en

In this study we investigate the possibility of spectra stitching in the context of Spectral Domain - Optical Coherence Tomography (SD-OCT). The aim is to reach a high axial resolution while keeping sampling issues to a low level (slow decay in depth) but still operating with the fastest camera line rate available. The paper focuses mainly on simulations of spectrometer signals and the stitching procedure. It briefly introduces the experimental system. The findings of this study are relevant to most of the SD-OCT systems and could also be transferred to Swept Source OCT (ß-OCT) where they will help to increase the axial resolution capabilities.@en