Automated vehicles pose a unique challenge to the safety of vulnerable road users. Research on cyclist-automated vehicle interaction has received relatively little attention compared to pedestrian safety. This exploratory study aims to bridge this gap by identifying cyclist-automated vehicle scenarios and providing recommendations for future research. In this study, we triangulated three sources: a systematic literature review of previous research on cyclists and automated vehicles, group interviews with eight traffic safety and automation experts, and questionnaire data. The resulting scenario collection comprised 20 prototypical scenarios of cyclist-automated vehicle interaction, grouped into four categories based on the road users’ direction of movement: crossing, passing, overtaking, and merging scenarios. The survey results indicated that right-turning vehicles, dooring scenarios, and more complex situations have the highest likelihood of accidents. Passing and merging scenarios are particularly relevant for studying automated vehicle communication solutions since they involve negotiation. Future research should also consider phantom braking and driving styles of vehicles, as well as programming proactive safety behaviours and designing on-vehicle interfaces that accommodate cyclists.

Marie Skłodowska-Curie Actions; Innovative Training Networks (ITN); SHAPE-IT; Grant number 860410

Publication date: 31 December 2023

DOI: 10.1016/j.trip.2023.100986

@en

With increasing implementation of automated driving technology it is expected that different automation modes will be present within the same vehicle and within a single trip. At all times during automated driving the driver needs to have ‘mode awareness’, which is an understanding of the automation mode and the corresponding responsibilities. Yet, research on HMI design to support mode awareness for multiple automation modes within a single vehicle and within a single trip is currently limited. The current work describes the development and evaluation of a Human Machine Interface (HMI) to support mode awareness while driving in different automation modes. The work exists of three phases: Phase 1 defines functional requirements for HMI design based on literature review and 5 experimental studies including 146 participants. Phase 2 implements the functional requirements in HMI design through expert and focus group sessions. Phase 3 evaluates and improves upon the HMI design employing virtual reality and the RITE (Rapid Iterative Testing and Evaluation) method with 18 participants. The result is a continuous and holistic HMI design creating mode awareness through ambience. Findings from Phase 3 and previous research indicate that this HMI is comprehended well, with a relatively low task load, and with a good experienced system usability. It is important to additionally evaluate the HMI design resulting from the current study in driving simulators and in on-road tests. Such tests will provide an opportunity to verify and expand on the current study's findings and to contribute to guidelines for HMI design.

@en

In the transition towards higher levels of vehicle automation, one of the key concerns with regards to human factors is to avoid mode confusion, when drivers misinterpret the driving mode and therewith misjudge their own tasks and responsibility. To enhance mode awareness, a clear human centered Human Machine Interface (HMI) is essential. The HMI should support the driver tasks of both supervising the driving environment when needed and self-regulating their non-driving related activities (NDRAs). Such support may be provided by either presenting continuous information on automation reliability, from which the driver needs to infer what task is required, or by presenting continuous information on the currently required driving task and allowed NDRA directly. Additionally, it can be valuable to provide continuous information to support anticipation of upcoming changes in the automation mode and its associated reliability or required and allowed driver task(s). Information that could support anticipation includes the available time until a change in mode (i.e. time budget), information on the upcoming mode, and reasons for changing to the upcoming mode. The current work investigates the effects of communicating this potentially valuable information through HMI design. Participants received information from an HMI during simulated drives in a simulated car presented online (using Microsoft Teams) with an experimenter virtually accompanying and guiding each session. The HMI either communicated on automation reliability or on the driver task, and either included information supporting anticipation or did not include such information. Participants were thinking aloud during the simulated drives and reported on their experience and preferences afterwards. Anticipatory information supported understanding about upcoming changes without causing information overload or overreliance. Moreover, anticipatory information and information on automation reliability, and especially a combination of the two, best supported understandability and usability. Recommendations are provided for future work on facilitating supervision and NDRA self-regulation during automated driving through HMI design.@en