Inspired by the activation mechanism of slow anion channels 1 (SLAC1) in plants that proton pump reversibly induces plant stomata open for CO2 adsorption, a CO2-switching H+ conduction/HCO3− diffusion dual ion channel (CO2-switching-DIC) was constructed by assembling γ-cyclodextrin-MOF (γ-CD-MOF) and 3,4,9,10-perylenetetracarboxylic acid (PTCA) for CO2 chemiresistive sensing. The obtained CO2 sensor exhibited high response (Rg/R0 = 1.33, 50 ppm) and selectivity, low practical limit of detection (1 ppm) and excellent consistency (94.5%) with a commercial infrared CO2 meter at room temperature. It is indicated that hydrogen bond networks in CO2-switching-DIC will be enlarged with the increasing of carboxylic group’s content on perylene skeleton, thereby modulating proton conductivity at molecular level and furthermore CO2 sensing performance of the composite. The CO2-switching-DIC-based sensor has been utilized to distinguish the exhaled CO2 concentration between lung cancer patients and healthy individuals, illustrating its promising application prospect in non-invasive diagnose.@en

A new type of carbonized polymer dot was prepared by the one-step hydrothermal method of triethoxylsilane (TEOS) and citric acid (CA). The sensor made from carbonized polymer dots (CPDs) showed superior gas sensing performance toward ammonia at room temperature. The Si, O-codoped CPDs exhibited superior ammonia sensing performance at room temperature, including a low practical limit of detection (pLOD) of 1 ppm (Ra/Rg: 1.10, 1 ppm), short response/recovery time (30/36 s, 1 ppm), high humidity resistance (less than 5% undulation when changing relative humidity to 80 from 30%), high stability (less than 5% initial response undulation after 120 days), reliable repeatability, and high selectivity against other interferential gases. The gas sensing mechanism was investigated through control experiments and in situ FTIR, indicating that Si, O-codoping essentially improves the electron transfer capability of CPDs and synergistically dominates the superior ammonia sensing properties of the CPDs. This work presents a facile strategy for constructing novel high-performance, single-component carbonized polymer dots for gas sensing.@en

Fractional exhaled nitric oxide (FeNO) can be used to describe inflammatory processes in the respiratory tract. Directly detecting ppb-level nitric oxide (NO) with chemiresistive sensors at room temperature faces the challenges of simultaneously obtaining high sensitivity and high stability for sensors. We aimed to improve the stability and sensitivity of NO sensors. We assembled sheet-like porphyrin-based MOF DLS-2D-Co-TCPP(Fe) with 5-aminonaphthalene-1-sulfonic acid-rGO (ANS-rGO) nanosheets through coordination interactions. In this way, we offered a room-temperature NO-sensing hybrid, DLS-2D-Co-TCPP(Fe)/ANS-rGO, with a sheet-on-sheet (SOS) architectural heterojunction. The DLS-2D-Co-TCPP(Fe)/ANS-rGO-based sensor demonstrated superior NO-sensing performance, including high sensitivity (R_a/R_g = 1.33, 250 ppb), reliable repeatability, high selectivity, and fast response/recovery (150 s/185 s, 1 ppm) at a sensing concentration from 100 ppb to 10 ppm at room temperature. The obtained sensor showed high stability, retaining >85% of its initial response after 60 days. Designing NO-responsive Fe-N₄ active units containing MOF nanosheets, along with constructing a heterojunction with an SOS architecture to facilitate carrier migration, collaboratively dominated the superior performance of synthesized NO sensors. This work provides a strategy for designing SOS architectural heterojunctions to obtain high-performance MOF-based gas-sensing materials.

@en