Coherence-based synthetic aperture radar (SAR) tomography (TomoSAR) exploits the complex coherences of SAR images to achieve 3-D imaging. Utilizing two-sensor spaceborne SAR formation flying to realize coherence-based TomoSAR has attracted increasing attention because temporal decorrelation-free interferograms can be constructed; therefore, TomoSAR has excellent potential for inverting the vertical structures of natural scenes such as forests and glaciers. However, low earth orbit (LEO) TomoSAR is disadvantaged by limited data and nonuniform sampling in the elevation direction. Geosynchronous (GEO) TomoSAR can overcome these limitations owing to its short revisit time of no more than 24 h. For the first time, this article discusses coherence-based TomoSAR exploiting GEO SAR formation flying. The benefits of GEO-formation coherence-based TomoSAR, including the low cost of slave satellites, rich data sets, and uniform sampling, are noted. The key problems of system design, including the formation design and data acquisition, are discussed. A formation design method based on the minimum along-track baseline is proposed that can realize uniform elevation sampling. The geometric correlation of a general SAR observation geometry is derived; on this basis, an optimal data acquisition method based on the optimal height measurement Cramer-Rao lower bound (CRLB) is proposed. Finally, the performance of GEO-formation coherence-based TomoSAR is analyzed; in particular, the ambiguity height in the altitude direction, the Rayleigh resolution in the altitude direction, and the theoretical optimal geometric correlation are evaluated. Finally, computer simulations validate the proposed formation design method, data acquisition scheme, and performance analysis formula.

Based on its ability to obtain two-dimensional (2D) high-resolution images in all-time and all-weather conditions, spaceborne synthetic aperture radar (SAR) has become an important remote sensing technique and the study of such systems has entered a period of vigorous development. Advanced imaging modes such as radar interferometry, tomography, and multi-static imaging, have been demonstrated. However, current in-orbit spaceborne SARs, which all operate in low Earth orbits, have relatively long revisit times ranging from several days to dozens of days, restricting their temporal sampling rate. Geosynchronous SAR (GEO SAR) is an active research area because it provides significant new capability, especially its much-improved temporal sampling. This paper reviews the research progress of GEO SAR technologies in detail. Two typical orbit schemes are presented, followed by the corresponding key issues, including system design, echo focusing, main disturbance factors, repeat-track interferometry, etc, inherent to these schemes. Both analysis and solution research of the above key issues are described. GEO SAR concepts involving multiple platforms are described, including the GEO SAR constellation, GEO-LEO/airborne/unmanned aerial vehicle bistatic SAR, and formation flying GEO SAR (FF-GEO SAR). Due to the high potential of FF-GEO SAR for three-dimensional (3D) deformation retrieval and coherence-based SAR tomography (TomoSAR), we have recently carried out some research related to FF-GEO SAR. This research, which is also discussed in this paper, includes developing a formation design method and an improved TomoSAR processing algorithm. It is found that GEO SAR will continue to be an active topic in the aspect of data processing and multi-platform concept in the near future.