This paper represents an expert view from Europe of future emerging technologies within the wind energy sector considering their potential, challenges, applications and technology readiness and how they might evolve in the coming years. These technologies were identified as originating primarily from the academic sector, some start-up companies and a few larger industrial entities. The following areas were considered: airborne wind energy, offshore floating concepts, smart rotors, wind-induced energy harvesting devices, blade tip-mounted rotors, unconventional power transmission systems, multi-rotor turbines, alternative support structures, modular high voltage direct current generators, innovative blade manufacturing techniques, diffuser-augmented turbines and small turbine technologies. The future role of advanced multiscale modelling and data availability is also considered. This expert review has highlighted that more research will be required to realise many of these emerging technologies. However, there is a need to identify synergies between fundamental and industrial research by correctly targeting public and private funding in these emerging technology areas as industrial development may outpace more fundamental research faster than anticipated.

@en

A control scheme for drag power kites, also known as airborne wind turbines, for the entire wind speed range is proposed, including 1) a temperature controller allowing for temporary overloading of the powertrain; 2) a limitation controller ensuring that power, force, speed, and actuator constraints are satisfied; 3) a tangential flight speed controller; and 4) a tangential force control allocation, which inverts the nonline arities of the plant and allocates the flight speed controller’s tangential force demand to the available actuators. The drag power kite plant model is based on a point-mass model and a simple aerodynamics model with various drag contributions. Simulations are conducted with the parameters of the 20 kW Wing 7 developed by Makani Power, Inc. The proper working of the control scheme is indicated by the good match of the simulation results with independent simulation results and measurements published by Makani. A temporary overloading of the power train with about twice the nominal power can be concluded as a requirement; otherwise the mean power would be significantly lower. Because of the reduction of the lift and thus reduction of the centripetal force at high wind speeds, the inside-down figure eight can be concluded as the best pattern. @en