Internet of Things (IoT) technology promises to bring new value creation opportunities across all major industrial sectors. This will yield industries to deploy more devices into their networks. A key pillar to ensure the safety and security of the running services on these devices is remote attestation. Unfortunately,existing solutions fail to cope with the recent challenges raised by large IoT networks. In particular, the heterogeneity of the devices used in the network affects the performance of a remote attestation protocol. Another challenge in these networks is their dynamic nature: More IoT devices may be added gradually over time. This poses a problem in terms of key management in remote attestation. We propose FADIA, the first lightweight collaborative remote attestation protocol that is designed with fairness in mind. FADIA enables fair distribution of load/tasks on the attesting devices to achieve better performance. We also leverage the Eschenauer-Gligor scheme to enable efficient addition of devices to the network. We implement our solution on heterogeneous embedded devices and evaluate it in real scenarios. The evaluation shows that FADIA can (i) increase the lifetime of a network by an order of magnitude and (ii) decrease the remote attestation runtime by a factor of 1.6.

Firmware updates are often termed as a panacea to vulnerable Internet-of-Things (IoT) networks, as firmware updates can fix the exposed bugs and prevent them from being exploited in the future. However, a secure firmware update is a challenging task as IoT devices are often employed in unattended networks. Moreover, malicious updates of firmware in any of the devices of a network, or the non-execution of an update, can create havoc. Although security mechanisms like remote attestation (RA) are quite popular to identify malicious nodes in a network, they are costly in terms of computation/memory usage and communication overhead. To overcome these issues, we propose a “Secure Hardware-enabled Protocol for Firmware Updates (SHeFU)”. The aim of the proposed protocol is two-fold: 1) we obviate the need for remote attestation, and 2) we make sure that malicious nodes are isolated from benign nodes. Assuming a restricted threat model and network constellation, SHeFU ensures secure firmware updates and prevents compromised nodes from communicating with benign nodes in a network.

Remote attestation has emerged as a valuable security mechanism which aims to verify remotely whether or not a potentially untrusted device has been compromised. The protocols of Remote attestation are particularly important for securing Internet of Things (IoT) systems which, due to the large number of interconnected devices and limited security protections, are susceptible to a wide variety of cyber attacks. To guarantee the integrity of a software running on a single device, remote attestation is usually executed as an uninterrupted procedure: at the attestation time, a device stops the normal operation and executes the attestation of the entire device without interruption. The remote attestation protocols that aim to attest a large number of devices also follow the assumption on uninterrupted execution: when a device attests its network neighbours, each device verified in the neighborhood suspends its normal operation until the attestation protocol is completed. To avoid unnecessary suspension of the normal operation of the devices, this paper proposes a novel Secure Asynchronous Remote Attestation (SARA) protocol that releases the constraint of synchronous interaction among devices. In particular, SARA is an attestation protocol that exploits asynchronous communication capabilities among IoT devices in order to attest a distributed IoT service executed by them. SARA verifies both that each IoT device is not compromised (device trustworthiness), and that the exchanged communication data have not maliciously influence the communicating devices (legitimate operations). By tracing the execution order of each service invocation of an asynchronous distributed service, SARA allows each service to collect accurately historical data of its interactions, and transmits asynchronously such historical data to other interacting services. We have implemented and validated SARA through a realistic simulation on the Contiki emulator that demonstrates the functionality and efficiency of our protocol. The results confirm the suitability of SARA for low-end devices.

In recent years, the booming of Internet of Things (IoT) has populated the world with billions of smart devices that implement novel services and applications. The potential for cyberattacks on IoT systems have called for new solutions from the research community. Remote attestation is a widely used technique that allows a verifier to identify software compromise on a remote platform (called prover). Traditional challenge-response remote attestation protocols between the verifier and a single prover face a severe scalability challenge when they are applied to large scale IoT systems. To tackle this issue, recently researchers have started developing attestation schemes, which we refer to as Collective Remote Attestation (CRA) schemes, that are capable of remotely performing attestation of large networks of IoT devices. In this paper, after providing the reader with a background on remote attestation, we survey and analyze existing CRA schemes. We present an analysis of their advantages and disadvantages, as well as of their effectiveness against a reference attacker model. We focus our attention on CRA schemes' characteristics and adversarial mitigation capabilities. We finally highlight open research issues and give possible directions for mitigating both the limitations of existing schemes, and new emerging challenges. We believe this work can help guiding the design of current and future proposals for CRA.

Cybercrime in the past decade has experienced an all-time high due to the inclusion of so-called smart devices in our daily lives. These tiny devices with brittle security features are often dubbed as the Internet of Things (IoT). Their inclusion is not only limited to our daily lives but also in different fields, for example, healthcare, smart-industries, aviation, and smart-cities. Although IoT devices make our lives easy and perform our jobs in a smart way, but their fragile security mechanisms pose a severe challenge regarding safety and privacy of its users. Attacks like Stuxnet, and Mirai-botnet are the key examples of the damages that can be caused by maliciously controlling these devices. One effective tool to identify a malicious entity at a network device is to perform Remote Attestation (RA). However, performing RA over a large, heterogeneous IoT network is difficult tasks due to resource constrain nature of these networks. To this end, we propose a novel scheme called SARP, which is an attestation-assisted secure and scalable routing protocol for IoT networks. SARP performs attestation in large scale IoT networks by using Routing Protocol for Low Power and Lossy Networks (RPL) framework and exploiting the inbuilt features of RPL. In particular, SARP uses attestation technique that not only secures the network from internal attacks, but it also provides security to RPL's data communication process, which helps to improve the overall network performance. Moreover, SARP supports network mobility, device heterogeneity, and network scalability, while it does not sacrifice the key requirements of IoT networks such as low energy and memory consumption, and low network overhead. The simulation results obtained in different IoT scenarios in presence of various types of attacks show the effectiveness of SARP, concerning energy consumption, packet delivery ratio, network overhead, data integrity, and communication security.