In this article, a nonlinear semianalytical model (SAM) is presented to predict the magnetic field distribution (MFD) and electromagnetic performances (EPs) in the cubic spoke-type permanent magnet (PM) machine. To model the rectangular PMs, the rectangular PM is simplified as a combination of fan-shaped regions with different arc angles. Then, the MFD and EPs of the cubic spoke-type machines can be obtained by the harmonic modeling technique. Particularly, the saturation of the magnetic bridges is considered by the nonlinear iterative algorithm. The proposed nonlinear SAM is studied on a 12-slot/8-pole cubic PM prototype, and the nonlinear finite element model and experiment verify its correctness. The main contribution of this article is to present a general analytical modeling method for cubic spoke-type PM machines and consider the magnetic saturation of magnetic bridges.

This article proposes a hybrid analytical model (HAM) for predicting ac copper losses in hairpin windings. The HAM combines the nonlinear semi-analytical model (SAM) and the 1-D ac copper loss computation model to solve the inaccurate boundary solutions of the 1-D ac copper loss computation model when magnetic saturation occurs in the stator teeth. The HAM is used to study the ac losses of the hairpin windings with four different conductor arrangements under different current excitation conditions, and the versatility of the HAM is verified. The HAM has high calculation accuracy, and the calculation speed is 66% faster than the finite element (FE) model. The primary contribution of this research is to present a quick and simple approach for accurately predicting ac copper losses in hairpin windings with arbitrary conductor arrangements.

This article proposes a discrete-time dynamic-decoupled current controller for an LCL-equipped high-speed permanent magnet synchronous machine with only the motor currents measured. The controller is designed in the synchronous coordinate based on a complex z-domain transfer function. The main contribution of the proposed current controller is the robust dynamic decoupling performance to achieve better transient behavior. Moreover, an effective coefficient selection method is developed to acquire sufficient phase margin and gain margin, even with the system parameters varying ± 50%. Additionally, the stable region of the LCL resonance with the proposed method is discussed. Finally, the effectiveness of the proposed method is verified by driving the tested motor to 100 kr/min.

This article introduces a three-mode variable-frequency zero-voltage switching (ZVS) modulation method for the four-switch buck+boost converter. This method makes this circuit concept well suited for applications, such as wireless power charging of electric vehicles, where this circuit operates as a power buffer between the resonant converter and the battery with the function to implement the required charging profile. Herein, the buck+boost converter operation is subdivided into three operating regions according to the converter static voltage gain, i.e., buck-, buck-boost- and boost-type modes. A ZVS turn-on triangular current mode (TCM) control is adopted for buck-type and boost-type modes. In the buck-boost-type mode when the input-to-output voltage gain is close to unit, all the possible modulation cases are studied thoroughly based on the phase shift of the two half bridges in a full switching period. The selection of the most suitable modulation scheme is performed to minimize the rms value of the inductor current while taking into account the simplification of the practical implementation. Closed-form equations are derived, which makes it easy to implement in practice. The proposed strategy is described, analyzed, and finally verified through a 3 kW surface mounted device (SMD) silicon carbide (SiC) mosfet-based laboratory prototype with designed input voltage of 300-600 V and the typical output voltage of 400 V class battery. The efficiency from the measured results is remarkably high, i.e., between 99.2% and 99.6% in a power range from 1 to 3 kW. Finally, tests for the operating mode transitions demonstrated the feasibility of the proposed modulation method. The power density of this converter is 4.86 kW/L.

This article proposes a compensation method of position estimation error for high-speed surface-mounted permanent magnet synchronous motors based on robust inductance estimation. The proposed method relies on the variation of the estimated δ-axis back back-electromotive force when a small current is injected into the γ axis. The inductance estimation error is limited within pm !5% when the nominal resistance and inductance vary bf pm 30% of their real values. With the estimated inductance, the position estimation error can be well compensated. Compared with the conventional current-injection method, the proposed method has enhanced robustness against the system noises. Benefiting from this, it is effective to estimate the inductance with a small injected current ( bf 0.5% of the rated current), where the conventional methods fail. Finally, the effectiveness of the proposed method is validated by simulation and experiment results on a 100 kr/min (1.67 kHz) high-speed permanent magnet synchronous machines accurately with 10-kHz sampling frequency.