A greater understanding of the erosion behaviour of sewer sediments is necessary in order to reliably estimate the amount and nature of the sewer sediments released from deposits in sewers and transported either to waste water treatment plants or discharged into the environment. Research has indicated that microbial activity in sediment can influence the physical release of sediment from in-pipe deposits. This paper reports on a series of erosion tests in which sewer sediments from different sewer networks are kept under different environmental conditions and their resistance to erosion is examined. The erosion tests are carried out under aerobic and anaerobic conditions and two temperatures, one representing ambient sewer temperatures and a lower temperature that significantly suppresses bacterial activity.@en

Modelling suspended solids transport is a key issue for predicting the pollution load discharged by CSOs. Nonetheless, there is still much debate on the main drivers for suspended solids transport and on the modelling approach to be adopted. Current sewer models provide suspended solids transport models. These models, however, rely upon erosion–deposition criteria developed in fluvial environments, therewith oversimplifying the sewer sediment characteristics. Consequently, the performance of these models is poor from a theoretical point of view. To get an improved understanding of the temporal and spatial variations in suspended solids transport, a measuring network was installed in the sewer system of Loenen in conjunction with a hydraulic measuring network from June through December 2001. During the measuring period, 15 storm events rendered high-quality data on both the hydraulics and the turbidity. For each storm event, a hydrodynamic model was calibrated using the Clemens’ method. The conclusion of the paper is that modelling of suspended solids transport has been and will be one of the challenges in the field of urban drainage modelling. A direct relation of either shear stress or flow velocity with turbidity could not be found, likely because of the time varying characteristics of the suspended solids. @en