This work aims to develop a low-fidelity model for a lattice support structure for offshore wind applications. The proposed low-fidelity model consists of a sequence of regular Timoshenko beams, each of them characterized by homogenized mechanical and mass properties representative of the single bays of the reference space-frame structure. The homogenized elastic coefficients of the sequence of beams are then computed by means of two alternative procedures: case (a), via analytical expressions available in the literature and accounting for a partially isotropic behaviour; case (b) by means of an optimization procedure, with ad hoc calibration factors. The suggested methods to derive the homogenized elastic coefficients are then tested for both straight and tapered lattice structures. The prediction performance is evaluated in terms of estimation of the first five natural frequencies and mode shapes, response to dynamic loads, and ability to predict rotor-structure interaction phenomena. A parametric study is then performed to evaluate the potential and limitations of the proposed models. To bypass the optimization procedure (b), a data-driven approach is also proposed for the case of straight lattice structures. Overall, the developed low-fidelity model leads to a computational speed-up factor of at least 60. The prediction reliability of the low-fidelity model is discussed for a tapered and regular straight lattice structure. However, for the latter one, a more detailed comparative study between the various modelling assumptions is performed and discussed. With reference to the straight lattice tower, whenever an optimization procedure is used (case (b)), and with reference to a typical subset of the investigated geometrical parameter space, the mean prediction error of the first five natural frequencies is lower than 1%. On the other hand, for case (a) and for the same investigated subset, the mean prediction errors for the first two bending modes and the torsional mode are, 5.2%, 13.3% and 18.8%, respectively. These results are improved in case a data-driven regression model is used to predict the calibration factors, leading to mean prediction errors below 5% for the entire investigated parameter space.

@en

The downwind configuration of wind turbines offers benefits regarding the blade-tower clearance, as during operation the blade primarily bends away from the tower. Consequently, the blades can be designed with lower stiffness. For tubular towers, however, a significant deficit of the wind speed in the tower wake occurs, resulting in fatigue-inducing vibrations. For this reason, full-height lattice towers are considered the preferred support structures for wind turbines with a downwind rotor. This work estimates the tower shadow excitation of a downwind rotor blade from a tubular tower. To this end, the blade of a commercial 6 MW downwind turbine is modelled with finite-elements. The tower wake is described on the basis of Madsen's model and for the unsteady aerodynamic interaction Küssner's function is adopted. At below- and above-rated wind conditions, the tower wake-induced vibrations are compared with the response of a blade of an equivalent upwind rotor, considering both the tip deflections and the root moments, the latter on the basis of damage-equivalent moments, to obtain an indication of the expected difference in fatigue damage. The downwind blade experiences vibrations with considerable larger amplitudes, especially in the out-of-plane direction. From the damage-equivalent moments it can be inferred that the blades of the downwind rotor encounter a much faster accumulation of fatigue damage.@en

The offshore wind market is developing towards exploiting wind resources in deeper water sites. Inevitably, this fuels new research and feasibility studies on alternative solutions for the wind turbine support structures. Within this context, this work aims at comparing three different support structure design concepts for a 14 MW two-bladed downwind wind turbine: an XXL monopile, a hybrid jacket-tower and a lattice tower. To ensure a fair comparability of the three design concepts, a load capacity analysis is first performed to assess the yield strength of each concept and guarantee a similar material utilization. The comparative analysis is then carried out in terms of total mass, dynamic behaviour of the interaction between rotor and support structure, soil-structure interaction and resulting hydrodynamic forces. Based on the given design constraints, the preliminary results of this study favour a lattice tower solution. The study also highlights peculiar dynamic phenomena such as veering, mode hybridization and mode coalescence for the dynamic interaction between the lattice tower and the two-bladed rotor which need to be taken into account during the design phase.@en

To meet the political goals regarding renewable energy production, offshore wind keeps expanding to waters with larger depths and harsher conditions, while the turbine size continues to grow and ever-larger foundation structures are required. This development can only be successful if further cuts in the levelized cost of energy are established. Regarding the design of the foundation structures, a particular challenge in this respect relates to the reduction of the total computational time required for the design. For both practical and commercial reasons, the decoupled modelling of offshore wind support structures finds a common application, especially during the preliminary design stage. This modelling approach aims at capturing the relevant characteristics of the different environment-structure interactions, while reducing the complexity as much as possible. This paper presents a comprehensive review of the state-of-the-art modelling approaches of environmental interactions with offshore wind support structures. In this respect, the primary focus is on the monopile foundation, as this concept is expected to remain the prominent solution in the years to come. Current challenges in the field are identified, considering as well the engineering practice and the insights obtained from code comparison studies and experimental validations. It is concluded that the decoupled analysis provides valuable modelling perspectives, in particular for the preliminary design stage. In the further development of the different modelling strategies, however, the trade-off with computational costs should always be kept in mind.@en