The collapse dynamics and runout of columns of elongated grains in two dimensions are numerically investigated in dry and immersed conditions, by means of an unresolved finite elements/discrete elements model. The elongated grains are modeled as rigid aggregates of disks. The column aspect ratio is systematically varied from 0.125 to 16 in order to span short and tall columns. To analyze the effect of the initial grain orientation, columns with an initial grain orientation that is either random or aligned with a given direction are both considered. Collapse dynamics, both in dry and immersed cases, are found analogous to that previously observed for circular grain columns, particularly with respect to the power law dependency for the runout as a function of the column aspect ratio. The effect of the fluid mainly results in a decrease of the runout distance. Interestingly, the collapse dynamics and runout are not significantly affected by the initial orientation of the grains, except maybe in the extreme case where the grains are all horizontally oriented, which geometrically prevents the collapse. Finally, a scaling based on the front propagation energy is proposed allowing one to unify the runout of short to tall and dry to immersed columns in a single description, regardless of the initial grain orientation.@en

The discontinuous Galerkin (DG) finite element method is well suited for the modelling, with a relatively small number of elements, of three-dimensional flows exhibiting strong velocity or density gradients. Its performance can be highly enhanced by having recourse to r-adaptivity. Here, a vertical adaptive mesh method is developed for DG finite elements. This method, originally designed for finite difference schemes, is based on the vertical diffusion of the mesh nodes, with the diffusivity controlled by the density jumps at the mesh element interfaces.
The mesh vertical movement is determined by means of a conservative arbitrary Lagrangian–Eulerian (ALE) formulation. Though conservativity is naturally achieved, tracer consistency is obtained by a suitable construction of the mesh vertical velocity field, which is defined in such a way that it is fully compatible with the tracer and continuity equations at a discrete level.
The vertically adaptive mesh approach is implemented in the three-dimensional version of the geophysical and environmental flow Second-generation Louvain-la-Neuve Ice-ocean Model (SLIM 3D; www.climate.be/slim). Idealised benchmarks, aimed at simulating the oscillations of a sharp thermocline, are dealt with. Then, the relevance of the vertical adaptivity technique is assessed by simulating thermocline oscillations of Lake Tanganyika. The results are compared to measured vertical profiles of temperature, showing similar stratification and outcropping events.@en

Interaction of tidal flow with a complex topography and bathymetry including headlands, islands, coral reefs and shoals create a rich submesoscale field of tidal jets, vortices, unsteady wakes, lee eddies and free shear layers, all of which impact marine ecology. A unique and detailed view of the submesoscale variability in a part of the Great Barrier Reef lagoon, Australia, that includes a number of small islands was obtained by using a “stereo” pair of 2-m-resolution visible-band images that were acquired just 54 s apart by the WorldView-3 satellite. Near-surface current and vorticity were extracted at a 50-m-resolution from those data using a cross-correlation technique and an optical-flow method, each yielding a similar result. The satellite-derived data are used to test the ability of the second-generation Louvain-la-Neuve ice-ocean model (SLIM), an unstructured-mesh, finite element model for geophysical and environmental flows, to reproduce the details of the currents in the region. The model succeeds in simulating the large-scale (> 1 km) current patterns, such as the main current and the width and magnitude of the jets developing in the gaps between the islands. Moreover, the order of magnitude of the vorticity and the occurrence of some vortices downstream of the islands are correctly reproduced. The smaller scales (< 500 m) are resolved by the model, although various discrepancies with the data are observed. The smallest scales (< 50 m) are unresolved by both the model- and image-derived velocity fields. This study shows that high-resolution models are able to a significant degree to simulate accurately the currents close to a rugged coast. Very-high-resolution satellite oceanography stereo images offer a new way to obtain snapshots of currents near a complex topography that has reefs, islands and shoals, and is a potential resource that could be more widely used to assess the predictive ability of coastal circulation models.

@en

Understanding the transport and fate of suspended sediment exported by rivers is crucial for the management of sensitive marine ecosystems. Sediment transport and fate can vary considerably depending on the geophysical characteristics of the coastal environment. Fine sediment transport was studied in a setting in between “open” (uninterrupted coasts) and “semi-enclosed” (bays) coastal systems, namely a “semi-open” system of shallow coastal water with long (∼20 km) stretches of open coasts separated by capes and headlands. The case study was the large, seasonal, Burdekin River that discharges to a wide continental shelf containing headlands and shallow embayments adjacent to the Great Barrier Reef, Australia. A new three-dimensional fine sediment module for the unstructured-mesh SLIM 3D hydrodynamic model was developed. The model was successfully validated against available field data. The results were compared to previous studies on the Burdekin River sediment transport and differences were analysed. Wind direction and speed during river floods largely control the dynamics and the fate of the fine sediment. Most (67% for 2007) of the riverine fine sediment load is deposited near the river mouth; the remaining sediment is transported further afield in a riverine freshwater plume; that sediment can reach sensitive marine ecosystems and should be a priority for management. During the rest of the year, when the river flow has ceased, wind-driven resuspension events redistribute the deposited sediment within embayments but generate negligible longshore transport. This study suggests that semi-open systems trap most of the riverine fine sediment, somewhat like semi-enclosed systems.@en