Influence of alloying element on the corrosion resistance of rolled zinc sheet

Drying effects on corrosion properties of CR(VI)- and CR(III)- treated electrogalvanized steel

Inhibition of Corrosion of Zinc by Cr(VI) and CR(III) treatments

EIS study of the corrosion behaviour of anodically coated zinc

Effect of drying temperature on chromate conversion coatings on zinc

Investigation of Cr(III) based conversion coatings on electrogalvanised steel

Formation and degradation of the patina on zinc and zinc alloy surfaces. Funaz progress report period October 2002 - March 2003.

Effect of drying temperature on chromate coversion coatings on zinc.

Formation and degradation of the patina on zinc and zinc alloy surfaces. Quarterly project report NIMR period October - December 2003.

Formation and degradation of the patina on zinc and zinc alloy surfaces. Quarterly project report NIMR, period January - March 2003.

Formation and degradation of the patina on zinc and zinc alloy surfaces. Quarterly project report NIMR, period July - September 2003.

Formation and degradation of the patina on zinc and zinc aloy surfaces. Funaz progress report, period April 2003 - Septemer 2003.

Formation and degradation of the patina on zinc and zinc alloys surfaces. Quarterly project report NIMR, period April - June 2003.

Investigation of Cr(III)-based conversion coatings on elecro-galvanized steel.

Onderzoek naar de fundamentele werking van oppervlaktebehandelingen op aluminium en zink (FUNAZ). Voortgangsrapport nr 6

Formation and degradation of the patina on zinc and zinc alloy surfaces. Report Nr. 2 of project IZW98102

Formation and degradation of the patina on zinc and zinc alloy surfaces. Report Nr. 1 of project IZW98102

IOP FUNAZ: Investigation into the fundamental mechanism of surface treatments of aluminium and zinc. Quarterly report March 2002

Onderzoek naar de fundamentele werking van oppervlaktebehandelingen op aluminium en zink (FUNAZ). Voortgangsrapport nr 5

IOP FUNAZ: Investigation into the fundamental mechanism of surface treatments of aluminium and zinc. Quarterly report. April-June 2002