Mudstones are characterized by their tight matrix and are therefore of interest in various industries, including the petroleum and underground repository industry. These clay-rich rocks often show dynamic elastic anisotropy, which causes significant problems in geophysical interpretations. In addition, pore water has a significant effect on the bulk properties of mudstones. However, the degree of saturation is often not reported in the literature. This study investigates the impact of water saturation on the elastic anisotropy of the Whitby Mudstone. Four core plugs with different water saturations were deformed until failure and tested ultrasonically at effective confining pressure conditions of 25 MPa. P-wave and S-wave velocities were monitored along the symmetry axis, across the core diameter, and at ~49˚ to the horizontal bedding plane to calculate the full elastic tensor and subsequently the Thomsen anisotropy parameters. The degree of saturation highly affects the rock strength and static elastic properties and leads to significant changes in the elastic anisotropy parameters.@en

Mudstones are of great interest in the petroleum industry, since they can act as a source rocks, reservoirs and seals. Understanding the mechanical behaviour of these clay-rich rocks is crucial for successful hydrocarbon exploration and production. This study examines the impact of water saturation on the mechanical behaviour of the Whitby Mudstone. Triaxial compression tests are performed on mudstone samples with different water saturations at effective confining pressures of 5 MPa, 15 MPa, 25 MPa, and 40 MPa. The results show that the degree of saturation significantly affects the rock strength and static elastic properties (Young’s modulus and Poisson’s ratio). The mechanical properties obtained from partially-saturated mudstones should be treated with care when extrapolating them to in situ conditions.@en