Owing to their sensitive chemical-to-electrical transducer capabilities and compatibility with device miniaturization and low operation temperature, single-walled carbon nanotube field-effect transistor (SWCNT-FET) represents an attractive platform to provide solutions in the gas sensing field. In this work, SWCNT-FETs were fabricated and their performances for detecting low NO2 concentrations were evaluated. Outstanding devices response was obtained, which was shown to follow a 2 power law dependence between the response and the NO2 concentration in the range of 100 ppb up to 10 ppm. Such ultra-high response is attributed to an enhancement of the Schottky barrier modulation triggered by the specific device configuration. The device configuration is based on individual semiconducting SWCNTs directly connecting the interdigitated Source-Drain electrodes. To the best of our knowledge, the results reported here correspond to the most sensitive device among the devices based on non-functionalized carbon materials and operational at low temperatures. Furthermore, the obtained results are supported by a deep SWCNT characterization, and the changes in Schottky barrier's height induced by the presence of gas molecules are estimated and discussed. Overall, the present reported results provide useful information for establishing a robust process for the fabrication of the next generation of CNT based gas-sensing devices.@en

The present work aims to become a standard step for the fabrication of the next generation porous anodic alumina (PAA) templates based devices and to provide new insights on the mechanism involved in the porous anodic alumina formation. The oxide barrier layer at the bottom of the pores has been successfully thinned by applying an exponential voltage decrease process followed by a wet chemical etching. The impact of the potential drop on the PAA structure has been deeply investigated, as well as the electrolyte temperature, the number of potential steps and the exponential decay rate. The presented results underline that a smart adjustment between the anodization conditions and exponential voltage decay parameters can simultaneously give PAA structures with straight pores and remove the dielectric layer in spite of applying the exponential voltage decay step. Additionally, the PAA structure has been tuned to fabricate hierarchically nanoporous templates with secondary pores ranging from 2 up to 10 branches.

@en