Context. Gaining a full understanding of the planet and moon formation process calls for observations that probe the circumplanetary environment of accreting giant planets. The mid-infrared ELT imager and spectrograph (METIS) will provide a unique capability to detect warm-gas emission lines from circumplanetary disks. Aims. We aim to demonstrate the capability of the METIS instrument on the Extremely Large Telescope (ELT) to detect circumplanetary disks (CPDs) with fundamental v = 1 0 transitions of 12CO from 4.5 to 5 μm. Methods. We considered the case of the well-studied HD 100546 pre-transitional disk to inform our disk modeling approach. We used the radiation-thermochemical disk modeling code ProDiMo to produce synthetic spectral channel maps. The observational simulator SimMETIS was employed to produce realistic data products with the integral field spectroscopic (IFU) mode. Results. The detectability of the CPD depends strongly on the level of external irradiation and the physical extent of the disk, favoring massive (∼10 MJ) planets and spatially extended disks, with radii approaching the planetary Hill radius. The majority of 12CO line emission originates from the outer disk surface and, thus, the CO line profiles are centrally peaked. The planetary luminosity does not contribute significantly to exciting disk gas line emission. If CPDs are dust-depleted, the 12CO line emission is enhanced as external radiation can penetrate deeper into the line emitting region. Conclusions. UV-bright star systems with pre-transitional disks are ideal candidates to search for CO-emitting CPDs with ELT/METIS. METIS will be able to detect a variety of circumplanetary disks via their fundamental 12CO ro-vibrational line emission in only 60 s of total detector integration time.

Context. The Galilean satellites are thought to have formed from a circumplanetary disk (CPD) surrounding Jupiter. When it reached a critical mass, Jupiter opened an annular gap in the solar protoplanetary disk that might have exposed the CPD to radiation from the young Sun or from the stellar cluster in which the Solar System formed. Aims. We investigate the radiation field to which the Jovian CPD was exposed during the process of satellite formation. The resulting photoevaporation of the CPD is studied in this context to constrain possible formation scenarios for the Galilean satellites and explain architectural features of the Galilean system. Methods. We constructed a model for the stellar birth cluster to determine the intracluster far-ultraviolet (FUV) radiation field. We employed analytical annular gap profiles informed by hydrodynamical simulations to investigate a range of plausible geometries for the Jovian gap. We used the radiation thermochemical code PRODIMO to evaluate the incident radiation field in the Jovian gap and the photoevaporation of an embedded 2D axisymmetric CPD. Results. We derive the time-dependent intracluster FUV radiation field for the solar birth cluster over 10 Myr. We find that intracluster photoevaporation can cause significant truncation of the Jovian CPD. We determine steady-state truncation radii for possible CPDs, finding that the outer radius is proportional to the accretion rate Ṁ 0.4. For CPD accretion rates Ṁ < 10-12M- yr-1, photoevaporative truncation explains the lack of additional satellites outside the orbit of Callisto. For CPDs of mass MCPD < 10-6.2M-, photoevaporation can disperse the disk before Callisto is able to migrate into the Laplace resonance. This explains why Callisto is the only massive satellite that is excluded from the resonance.

Context. The origin of the reservoirs of water on Earth is debated. The Earth's crust may contain at least three times more water than the oceans. This crust water is found in the form of phyllosilicates, whose origin probably differs from that of the oceans. Aims. We test the possibility to form phyllosilicates in protoplanetary disks, which can be the building blocks of terrestrial planets. Methods. We developed an exploratory rate-based warm surface chemistry model where water from the gas-phase can chemisorb on dust grain surfaces and subsequently diffuse into the silicate cores. We applied the phyllosilicate formation to a zero-dimensional chemical model and to a 2D protoplanetary disk model (PRODIMO). The disk model includes in addition to the cold and warm surface chemistry continuum and line radiative transfer, photoprocesses (photodissociation, photoionisation, and photodesorption), gas-phase cold and warm chemistry including three-body reactions, and detailed thermal balance. Results. Despite the high energy barrier for water chemisorption on silicate grain surfaces and for diffusion into the core, the chemisorption sites at the surfaces can be occupied by a hydroxyl bond (-OH) at all gas and dust temperatures from 80 to 700 K for a gas density of 2 × 104 cm-3. The chemisorption sites in the silicate cores are occupied at temperatures between 250 and 700 K. At higher temperatures thermal desorption of chemisorbed water occurs. The occupation efficiency is only limited by the maximum water uptake of the silicate. The timescales for complete hydration are at most 105 yr for 1 mm radius grains at a gas density of 108 cm-3. Conclusions. Phyllosilicates can be formed on dust grains at the dust coagulation stage in protoplanetary disks within 1 Myr. It is however not clear whether the amount of phyllosilicate formed by warm surface chemistry is sufficient compared to that found in Solar System objects.

Context. Molecular hydrogen (H2) is the main constituent of the gas in the planet-forming disks that surround many pre-main-sequence stars. H2 can be incorporated in the atmosphere of the nascent giant planets in disks. Deuterium hydride (HD) has been detected in a few disks and can be considered the most reliable tracer of H2, provided that its abundance throughout the disks with respect to H2 is well understood. Aims. We wish to form H2 and HD efficiently for the varied conditions encountered in protoplanetary disks: the densities vary from 104 to 1016 cm-3; the dust temperatures range from 5 to 1500 K, the gas temperatures go from 5 to a few 1000 Kelvin, and the ultraviolet radiation field can be 107 stronger than the standard interstellar field. Methods. We implemented a comprehensive model of H2 and HD formation on cold and warm grain surfaces and via hydrogenated polycyclic aromatic hydrocarbons in the physico-chemical code PROtoplanetary DIsk MOdel. The H2 and HD formation on dust grains can proceed via the Langmuir-Hinshelwood and Eley-Ridel mechanisms for physisorbed or chemisorbed H (D) atoms. H2 and HD also form by H (D) abstraction from hydrogenated neutral and ionised PAHs and via gas phase reactions. Results. H2 and HD are formed efficiently on dust grain surfaces from 10 to ∼700 K. All the deuterium is converted into HD in UV shielded regions as soon as H2 is formed by gas-phase D abstraction reactions. The detailed model compares well with standard analytical prescriptions for H2 (HD) formation. At low temperature, H2 is formed from the encounter of two physisorbed atoms. HD molecules form on the grain surfaces and in the gas-phase. At temperatures greater than 20 K, the encounter between a weakly bound H-(or D-) atom or a gas-phase H (D) atom and a chemisorbed atom is the most efficient H2 formation route. H2 formation through hydrogenated PAHs alone is efficient above 80 K. However, the contribution of hydrogenated PAHs to the overall H2 and HD formation is relatively low if chemisorption on silicate is taken into account and if a small hydrogen abstraction cross-section is used. The H2 and HD warm grain surface network is a first step in the construction of a network of high-temperature surface reactions.