Representative stiffened panels are optimized such that multiple buckling modes and failure (using open hole allowables) occur within a range of 10% of the lowest buckling load. This implies the panels cannot be loaded up to the buckling load without risking failure, hence vibrational correlation testing was used to estimate the buckling loads and modes. At the same time, a finite element model was created using the Carrera Unified Formulation. This model was validated using the tests and a good correlation between both was observed. Three panels were manufactured and each panel was put in place for testing twice. Each time a panel was put in place, the test was repeated three times. This allowed us to get a ballpark estimate for the variation due to replicas of the panel, the test set-up and repeating the tests. @en

The present paper deals with the buckling and post-buckling analysis of a multilayered composite reinforced panel. The panel, design for aeronautical applications, results in a complex stacking sequence, and the development of a refined model able to describe its geometrical nonlinear behavior is mandatory to avoid the usage of highly computational effort-required 3D finite elements. The proposed approach is a finite element analysis based on the Carrera Unified Formulation (CUF). Thanks to CUF, a 1D model of the composite panel can be formulated and complicated stress fields within the structure can be evaluated, so the nonlinear behavior is fully described. A refined Equivalent Single Layer (ESL) technique is employed, making use of Lagrange polynomials for the description of the stacking sequence. The results clearly demonstrate the reliability of this approach, comparing the linearized buckling and nonlinear post-buckling solutions with those from Nastran (1D, 2D and 3D) and experiments. @en