The removal of acid gas impurities from synthesis gas or natural gas can be achieved using several physical solvents. Examples of solvents applied on a commercial scale include methanol (Rectisol), poly(ethylene glycol) dimethyl ethers (Selexol), n-methyl-2-pyrrolidone (Purisol), and propylene carbonate (Fluor solvent). Continuous Fractional Component Monte Carlo (CFCMC) simulations in the osmotic ensemble were used to compute the Henry coefficients of the pure gases CO (Formula presented.), CH (Formula presented.), C (Formula presented.) H (Formula presented.), CO, H (Formula presented.), N (Formula presented.), N (Formula presented.) O, and H (Formula presented.) S in the aforementioned solvents. The predicted Henry coefficients are in good agreement with the experimental results. The Monte Carlo method correctly predicts the gas solubility trend in these physical solvents, which obeys the following order: H (Formula presented.) S > CO (Formula presented.) > C (Formula presented.) H (Formula presented.) > CH (Formula presented.) > CO > N (Formula presented.) > H (Formula presented.). The gas separation selectivities for the precombustion process and the natural gas sweetening process are calculated from the pure gas Henry coefficients. The CO (Formula presented.) /N (Formula presented.) O analogy is verified for the solubility in these solvents.

@en

Computing bubble-points of multicomponent mixtures using Monte Carlo simulations is a non-trivial task. A new method is used to compute gas compositions from a known temperature, bubble-point pressure, and liquid composition. Monte Carlo simulations are used to calculate the bubble-points of carbon dioxide (CO2) and methane (CH4) mixtures in the ionic liquids (ILs) 1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [bmim][Tf2N] and 1-ethyl-3-methylimidazolium diethylphosphate [emim][dep]. The Continuous Fractional Component Monte Carlo (CFCMC) method in the osmotic ensemble has been used to compute the solubility of CO2/CH4 gas mixtures at different temperatures (T), pressures (P), and gas compositions (yi). The effect of T, P, and yi on the real CO2/CH4 selectivity (i.e., the selectivity of CO2 in the presence of CH4) is investigated. The real selectivity will differ from the ideal selectivity, which is defined as the ratio of the Henry's constants, if the solubility of CO2 is influenced by the presence of CH4. The computed real selectivities are compared with the experimentally obtained real and ideal selectivities. The real CO2/CH4 selectivity decreases with increasing temperature and pressure, while the gas phase composition has a minor effect. The real selectivity is approximately identical to the ideal selectivity for relatively low pressures and low solute concentrations in the liquid phase. The real selectivity deviates from the ideal selectivity as the solute concentration in the liquid phase increases.@en