Excessive underground train-induced vibration becomes a serious environmental problem in cities. To investigate the vibration transfer from an underground train to a building nearby, an explicit-integration time-domain, three-dimensional finite element model is developed. The underground train, track, tunnel, soil layers and a typical multi-story building nearby are all fully coupled in this model. The complex geometries involving the track components and the building are all modelled in detail, which makes the simulation of vibration transfer more realistic from the underground train to the building. The model is validated with in-situ tests data and good agreements have been achieved between the numerical results and the experimental results both in time domain and frequency domain. The proposed model is applied to investigate the vibration transfer along the floors in the building and the influences of the soil stiffness on the vibration characteristics of the track-tunnel-soil-building system. It is found that the building vibration induced by an underground train is dominant at the frequency determined by the P2 resonance and influenced by the vibration modes of the building. The vertical vibration in the building decreases in a fluctuant pattern from the foundation to the top floor due to loss of high frequency contents and local modes. The vibration levels in different rooms at a same floor can be different due to the different local stiffness. A room with larger space thus smaller local stiffness usually has higher vibration level. Softer soil layers make the tunnel lining and the building have more low frequency vibration. The influence of the soil stiffness on the amplification scale along the floors of the building is found to be nonlinear and frequency-dependent, which needs to be further investigated.

Reactive distillation (RD) is a process intensification technique that offers major advantages over conventional technologies by enabling the integration of reaction and separation into a single apparatus. This integration introduces and exploits complex interaction between mass transfer, chemical reaction and hydrodynamics within an RD column; however, these complexities can hinder the adoption of RD by industry. Many approaches have been developed by the scientific community to advance understanding and to expedite the initialization of RD design at the conceptual level. This paper critically discusses recent developments in conceptual methods for synthesizing RD processes. This review paper is the first to consider the range of available approaches for assessing the technical feasibility, controllability, economic viability, and sustainability of RD units by taking into account various configurations in which RD is treated as a new unit operation, and as part of process synthesis in a different way of designing processes based on functions. The review also addresses complex configurations, such as advanced RD technologies. Special attention is paid to process modeling and simulation as well as to education. Knowledge gaps to be filled by further research are indicated.

Interfacial wettability adjustment is a new method for intensifying vapor–liquid mass transfer process. Contact angle effect has been well investigated but not complete due to interfacial wettability consisting of both static behavior (contact angle) and dynamic behavior (contact angle hysteresis). Here, methods of adjusting contact angle hysteresis (CAH) were proposed, and then, the CAH effect on the hydrodynamics was investigated. A multiscale analysis of CAH effect, from interfacial force and wettability to single-bubble and gas–liquid two-phase flow inside the foam to bubble swarm hydrodynamics, was conducted, and thus, the hydrodynamic performance criteria were derived. The interfaces had similar contact angles, whereas a significant difference in the CAH was prepared by using the developed sol dip-coating and spray coating methods. Subsequent experiments revealed that lower CAH can decrease the pressure drop, homogenize the gas distribution, and increase the weeping rate, which are consistent with the derived criteria.