Study objectives: Unobtrusive monitoring of sleep and sleep disorders in children presents challenges. We investigated the possibility of using Ultra-Wide band (UWB) radar to measure sleep in children. Methods: Thirty-two children scheduled to undergo a clinical polysomnography participated; their ages ranged from 2 months to 14 years. During the polysomnography, the children's body movements and breathing rate were measured by an UWB-radar. A total of 38 features were calculated from the motion signals and breathing rate obtained from the raw radar signals. Adaptive boosting was used as machine learning classifier to estimate sleep stages, with polysomnography as gold standard method for comparison. Results: Data of all participants combined, this study achieved a Cohen's Kappa coefficient of 0.67 and an overall accuracy of 89.8% for wake and sleep classification, a Kappa of 0.47 and an accuracy of 72.9% for wake, rapid-eye-movement (REM) sleep, and non-REM sleep classification, and a Kappa of 0.43 and an accuracy of 58.0% for wake, REM sleep, light sleep and deep sleep classification. Conclusion: Although the current performance is not sufficient for clinical use yet, UWB radar is a promising method for non-contact sleep analysis in children.

@en

This paper presents an algorithm for the automatic registration of terrestrial point clouds by match selection using an efficiently conditional sampling method - Threshold-independent BaySAC (BAYes SAmpling Consensus) and employs the error metric of average point- To-surface residual to reduce the random measurement error and then approach the real registration error. BaySAC and other basic sampling algorithms usually need to artificially determine a threshold by which inlier points are identified, which leads to a threshold-dependent verification process. Therefore, we applied the LMedS method to construct the cost function that is used to determine the optimum model to reduce the influence of human factors and improve the robustness of the model estimate. Point- To-point and point- To-surface error metrics are most commonly used. However, point- To-point error in general consists of at least two components, random measurement error and systematic error as a result of a remaining error in the found rigid body transformation. Thus we employ the measure of the average point- To-surface residual to evaluate the registration accuracy. The proposed approaches, together with a traditional RANSAC approach, are tested on four data sets acquired by three different scanners in terms of their computational efficiency and quality of the final registration. The registration results show the st.dev of the average point- To-surface residuals is reduced from 1.4 cm (plain RANSAC) to 0.5 cm (threshold-independent BaySAC). The results also show that, compared to the performance of RANSAC, our BaySAC strategies lead to less iterations and cheaper computational cost when the hypothesis set is contaminated with more outliers.@en