Indoor environments tend to be more complex and more populated when buildings are accessible to the public. The need for knowing where people are, how they can get somewhere or how to reach them in these buildings is thus equally increasing. In this research point clouds are used, obtained by dynamic laser scanning of a building, since we cannot rely on architectural drawings for maps and paths, which can be outdated. The presented method focuses on the creation of an indoor navigation graph, based on IndoorGML structure, in a fast and automated way, while retaining the type of walkable surface. In this paper the focus has been on door detection, because doors are essential elements in an indoor environment, seeing that they connect spaces and are a logical step in a route. This paper describes a way to detect doors using 3D Medial Axis Transform (MAT) combined with the intelligence stored in the path of a mobile laser scanner, showing good first results. Additionally different spaces (e.g. rooms and corridors) in the building are identified and slopes and stairs in walkable spaces are detected. This results in a navigation graph which can be stored in an IndoorGML structure.@en

Generation of indoor networks for navigation will normally be done out of standard floor plans that are only 2D and is more often manual than automatic. These floor plans are drawn at a specific time and do not correspond to the reality, moreover some of those buildings were built already differently than designed. Then in due course the building will change both externally and internally. Also objects like furniture will be moved around in the building. If these changes are not updated in the map of the building, it becomes out of date and cannot be used for the creation of indoor navigable models anymore. To enable correct indoor navigation, we will need to have the current data of the indoor environment. This article concentrates on providing a new approach to generate up to date floor plans by using a mobile (and hand held) laser scanner in the fastest way. This device creates a point cloud and the corresponding trajectory at the same time. Because the mobile laser scanner device is operated by a walking human, the trajectory contains information about the surface the person is walking on. In this article, a method is explained for the detection of walkable spaces based on the analysis of the point cloud and its corresponding trajectory provided by the mobile laser scanner. Three steps will be used: voxelization, trajectory analysis and the identification of floor regions. Dynamic objects, doors, and furniture objects are also used to identify the surfaces which are available for navigation purposes. Three types of surfaces are considered: horizontal, slopes, and stairs.@en